switzxx20

Bad speed pulse reading. Mine was doing that too until I hooked up my VSS to the right wire, now I get perfect readings. I tapped into the same wire that my speedometer is feeding from Nice car

You probably have not connected the VSS to the right wire. As soon as I switched wires when I was only getting Simple Hybrid, it immediately went into 3D Hybrid. As you said earlier your vehicle dynamics work, it really has no relation. You can literally leave the pink wire disconnected and still have it work. My only recommendation is to find a forum that concentrates on your specific car and someone might have figured it out in the audio section. Or call your car manufacturer and they might be able to help out.

Hate to break it to ya, but 45 degrees Fahrenheit is pretty cold to most people (not me though, I love cold weather) This has happened to me once or twice, I am not really concerned. From what I've read, it is possible the screen will go black when it's too hot or too cold. When it first happened to me, I pulled over, turned the truck off, opened the door and closed it, started my truck back up and it was good My friend's Kenwood 6019 jams up when it's too hot outside so I guess it isn't just ours

Well at least the audio definitely comes through. I don't really care too much about the video, but I would be interested to see if there's a way to make it work. Thanks !

Does anyone know if this works with the CD-I200? I have an iPod Photo now and it works great with it, but my actual iPod is starting to act up If this has already been answered, sorry, I already searched on here for an answer!

Calm down, is your CAPS LOCK key broken?

Haha first time actually Unfortunately, winters here get a little cold since I am really close to the beach

Started up my truck this morning, cold as hell outside though. My iPod sound was coming through (I use the front mini-jack) and the buttons were lit up. Only thing is, the screen was blank. I pulled over, turned my truck off, popped open the door and started the engine. This time the unit powered up normally. Any idea why this happened?

bump

Guys having problems hooking up the VSS wire with your AVIC-D2 & D3 and have it installed in: -Chevrolet Colorado -GMC Canyon -Hummer H3 -Isuzu i-290 Go here: http://www.avic411.com/forum/viewtopic.php?t=10117

**It has been confirmed that this also works with the AVIC-D2 models** I know the answer has been already discussed, but I wanted to make an easy shortcut for those having problems hooking up the pink wire. I've had the pink wire hooked up at the PCM, then disconnected, and now finally properly connected. Just to be safe, I disconnected the negative battery terminal before doing this. 1. Grab the pink wire and run in it through the driver side firewall, or run in through the passenger firewall like I did. 2. Next, locate the wiring near the passenger fender. You should se

Haha I didn't realize you were like a professional installer I appreciate all the help, sometimes you can't trust the first thing you read about something. It helps to talk to someone helpful and knowledgeable.

Yikes. How did you make it work since you could not connect it? Would you mind if I asked you where you got the info for this? I'm pretty new to car audio stuff so I just wanted to read up a little

Sweet, I actually have a 2006. Thanks for the quick reply and I apologize for the amount of times you probably answer this question haha So this guy probably doesn't know what he's talking about then ?

Hey guys, I am regular on a few Chevrolet Colorado / GMC Canyon boards and I thought I'd come by & say hello. I just picked up an AVIC-D3, wiring harness, mounting kit and antenna adapter yesterday from Sonic Electronix for about $850 Naturally I am going to do the bypass but I am going to have professionals put my unit in since I am car audio challenged. My main concern is that someone told me the speed sensor CANNOT be hooked up in my truck (the pink wire). Is this possible? Thanks