Jump to content
AVIC411.com

2005RSX

Members
  • Content Count

    6
  • Joined

  • Last visited

About 2005RSX

  • Rank

  1. There isn't any reading at all for the: -Right Turn -Left Turn... *under 3D Calibration. please help!,, thank you in advance
  2. Car: 2005 Acura RSX I have the pink/white, VSS wire from the head unit, tapped onto the blue/white, on the car circuit, but still the reading is off. I've checked the "3D calibratin" under the Navi Menu- Hardware Info. -top half: Distance: 0 * won't change even driving Speed Pulse: ** keeps on going up even the car is in idle mode, not traveling Learning Status: Initializing sensor -bottom half: Distance: almost full in signal strength or progress bar ( dont know the term) Right Turn: nothing here at all Left Turn: nothing here at all 3D:
  3. Thank you, Superchiu, I did as you said and it worked... thanks again.
  4. I have a 2005 RSX, my Day/Night mode does NOT work either.... What wire or wires need to be connected to what. and/or is it just a setting problem. * under Hardware info/ Connection Status- Illumination shows "OFF" Please help.
  5. My car alarm stops working after the install of my D3. Can anybody please help me?.. any info would be much appreciated. "HARBOR SOUND" is the place where I took my car in to have it installed... I took the car back to ask them what they did to my alarm, you what they told me? "take it to the dealer"_ Avoid that damn place.
  6. Can someone please help me figure out as to which wire on the orginal 2005 RSX im suposed to connect the "ILL" wire to??? -On the Harness there's a pin for it, ILL, but there's no matching pin on the other factory OEM connector. Thanks in advance.
×
×
  • Create New...