Dubbedown
Members-
Content Count
70 -
Joined
-
Last visited
About Dubbedown
-
Rank
Member
-
it works, thanks everybodY!
-
ok sounds easy enough to do. connect back to audio input rcas, enable av in setup screen. will try again after work... but with this will i get sound from all speakers?
-
ok, so here's my update. pull the hu out and i see 3 sets of rca plugs. with aux "enabled", i try the first set of plugs which has a sticker around the wire "audio inputs." turn on mp3 player, nothing. so i try 2nd set of plugs, i hear faint sound, but ONLY from rear speakers. figure, that's strange but i go ahead and try the 3rd set of plugs. on the 3rd set, i get full (louder) sound from the front, but fronts ONLY. so my question, what am i doing wrong? was my hu wired up incorrectly b/c it seems like i can only get my aux input to either come out either through fronts or
-
thanks, will do! btw, love your sig. i think the newest sti is by far the best looking one. i'm not sure if you have any performance mods, but stock with just good audio/radar setup is pretty nice too. only have the rx65 but does the laser blocking really work???
-
i was clear until h3 posted but am now confused. did i do something wrong? i bought a wire with 3.5mm female plug on 1 end, and 2 rca male on the other end. i plugged the rca side into the back of the avic, where there were 2 rca females (with a sticker labeled audio input). on the 3.5mm side, i will connect it to my mp3 player. how do i get this to work? do i go into the initial screen and enable aux? or is aux and av "different"?
-
thanks guys, will give it a try after work.
-
what do you mean by enable? when i'm at the source screen and i see a list of sources, the aux icon (has rca plugs as icon) is grey'd out.
-
i had a d2 profesionally installed in my vw passat. only other "accessories" i have, are a jl stealthbox sub and a pioneer 12 disc changer. i recently decided to make an aux input port on an empty dash piece. so i bought a 2 rca male to 1 3.5mm female cable. i secured the 3.5mm side on the dash, and connected to rca end to another set of rca's from the headunit. those wires had a sticker "AUDIO INPUT" yet when i try accessing the aux in the audio sources, it's grey'd out and will not let me choose it. am i doing something wrong?
-
Ipod interface improvements, probably not. None of the n3 improvements were available for the n1/n2. hmm, what do u mean by no n3 improvements were avialable? i upgraded my n1 -> n3 via updated discs. it updated the user interface, menus loaded faster, and had small updated features like which lane to stay in when anticipating an exit.
-
if i recall correctly, the first icon is a measure of sensitivity. the icons afterwards mark the number of satellites you're connecting to. you need at least 3. i don't think the color codes mean anything... i think it's there to help u that yellow = first four, and starting from red is 5 and on... so basically u dont have to count the number of satellites.
-
weird on vw though... b/c both passat and jettas have same double din monsoon yet on my passat, there was a gap between headunit and hvac controls. =T
-
appreciate it. i guess it doesn't have to be a pioneer, as long as it'd mate with the pioneer antenna.
-
another few feet? dunno... i currently have it mounted on top of trunk, near center windshield but everytime i open/close trunk, see some of the wire sticking out of the trunk. i asked the installer if he could fix it but he said he had to loop it "that way" so that it would reach the trunk. if i wanted to hide the wire so it doesn't sneak out when i open/close trunk, he said i need some kind of extension to make cable longer =T
-
uh, there's a function to look up telephone numbers. dont recall exact name of it but it's on first screen under destination menu.
-
Anyone know if Pioeneer sells some kind of extension cable for the GPS antenna? Thanks!