ethanwa

How long was it between the last firmware update to the CarPlay update?

Looking forward to the next one with bug fixes!

Weird, I have that connected but still nothing. I'll double-check when I open it up to add my backup camera.

Maybe I missed this somewhere on a thread or something, but how do you turn on Night Mode? When I turn on my lights, the screen is still bright. What's the secret here?

Maps on CarPlay need much better contrast. It's really hard to see the roads at the default setting of 0 contrast, 0 brightness. Even setting the contrast way down only helps a little. Disappointing, although I think it's more Apple's fault and the fact that the screen is not HD quality in any way.

Coming from the NEX harness I have these wires: Yellow: Power (regardless of ignition) Red: Ignition Power Orange/White: Lighting Switch Black: Ground White, White/Black, Green, Green/Black, Gray, Gray/Black, Violet, Violet/Black: Speakers Blue/White: System Remote Control (to auto-antenna relay control terminal or antenna booster power control terminal) Pink: Car Speed Signal Light Green: Parking Brake Violet/White: Reverse-Gear Signal Not from harness is Yellow/Black: Mute Maybe I'm supposed to put the blue/white (harness), blue/white (ADBOX1), and blue (ADTY01) altoge

Hi all - I just got the AVIC-8000NEX today. I also needed the AXXESS AX-ADBOX1 for steering wheel controls (along with harnesses ADTY01 and the ASWC-1). I have only one last question before I go install this in my car (Toyota Sienna 2008 Limited)... The instruction manual for the AXXESS AX-ADBOX1 says: The problem is, I don't know what the "amp turn on wire" coming out of the 8000NEX is. I already have my blue/white wire from the 8000NEX connected to the blue wire on on my ADTY01 for the "radio's antenna turn on wire". All other wires are connected properly as far as I can