Hopefully this helps someone else. The digitizer is 165mm x 92mm, 6.95 inch, 4 wire, resistive. On the replacement I got, the ribbon cable doesn't come off the digitizer at the exact same location as the OEM (it's maybe 3/4 inch toward center), but it's long enough that you can fudge it over. There is enough airspace in the back cover for it to close without pinching the excess ribbon. It also does not come with the foam insulating tape around the edge, but it seems to work without it. Once installed, run through the 16 point screen calibration.
https://www.ebay.com/vod/FetchOrderDetails?
