Doiug

I began having a problem with my NEX 7200 after cleaning the screen with the unit off. I assume a tiny amount of cleaning solution caused the problem. The unit is about a year old. It has been about two weeks since this began so a drying out period has passed. The problems are: Erratic or no response to touch screen input. Erratic or no response to hard button input. Reassignment of some hard button inputs Unexpected opening of the tilt screen without any input. When in the Android Auto mode the unit seems to operate without some of these problems. Pi

I pulled the head unit out the other day and checked the ground to the bypass pin on connector #2. It appeared to be seated well in the connector but I took the time to strap it in such a way as to keep it tightly in the connector. Now I do have DVD play capabilities while moving! The AVIC-Z2 is great. It is THE way to enjoy sound while on the road. Nothing I have ever used intergrates XM and an iPod so well. Pioneer has got it right. Thanks for the help and thanks to Hyperite for starting the thread.

Thanks for the help. I'll remove the unit and check the ground to the bypass pin on #2 connector soon. I am a little confused as to why the system reported the update had been previously done. I assumed the system had to be update so the bypass could work. The bypass is a hardware and software affair isn't it? The confusing part to me is I am not totally sure the software part of the bypass is done. Why would the system report it had already been updated? I was able to get the ground wire inserted in the #2 connector pretty good. I followed Hyperite's directions and with the pho

I installed an August 2007 build AVIC Z2 today. I grounded the E-brake wire and removed a unused lead from the pioneer harness to add to the empty space on connector #2 and grounded it as well. When I tried to update using the image files I burned the unit told me update was already done. Of course I do not have DVD play capabilities once the truck is moving. I assume I lost the ground on connector #2 but if some one here could check my work so far I would appreciate it.