gjb777
-
Content Count
8 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Gallery
Posts posted by gjb777
-
-
On 7/3/2020 at 6:34 AM, MB01 said:
Hi. After many hours of screen presses, I figured it out. The Pioneer DMH-W and DMH-WT models have a special hidden menu bypass requirement. No interface bypass is required, but you can leave it connected if it is already installed. Dean and Fernando at Five Star Audio made a video of it on the tubes if you’d rather see it than read it. Here is how to do it:
1. Update the firmware to 1.13
2. Enable the hidden menu bypass by sourcing the radio off (source off, not power off).
3. Press and hold the bottom left corner of the screen for exactly 10 seconds (use a stopwatch as timing is critical).
4. Within 1 second, press and hold the bottom right corner (to the immediate left of bluetooth icon) for 10-12 seconds until a small “set on” icon will appear (in the bottom middle of the screen) confirming the bypass has been activated.
5. If you do not get it the first time, cycle the ignition off and back on and start over.
6. If you need to reverse this process, reset the radio.It worked! Only a small drive, but headed on a long drive tomorrow. Got it updated (use the settings, not the actual carassist app on head unit) Took me just 2 tries to get “set on” but appears all is well! Thankyou thankyou thankyou!!!
-
12 hours ago, MB01 said:
Hi. After many hours of screen presses, I figured it out. The Pioneer DMH-W and DMH-WT models have a special hidden menu bypass requirement. No interface bypass is required, but you can leave it connected if it is already installed. Dean and Fernando at Five Star Audio made a video of it on the tubes if you’d rather see it than read it. Here is how to do it:
1. Update the firmware to 1.13
2. Enable the hidden menu bypass by sourcing the radio off (source off, not power off).
3. Press and hold the bottom left corner of the screen for exactly 10 seconds (use a stopwatch as timing is critical).
4. Within 1 second, press and hold the bottom right corner (to the immediate left of bluetooth icon) for 10-12 seconds until a small “set on” icon will appear (in the bottom middle of the screen) confirming the bypass has been activated.
5. If you do not get it the first time, cycle the ignition off and back on and start over.
6. If you need to reverse this process, reset the radio.Thankyou!!! You are a life saver! Will try here shortly! Can I ask, what did you find is the easiest way to update? Having a hard time using that Car Assist app on my phone. Paired and all, but can’t seem to transfer the update
-
8 hours ago, Dizle said:
I don’t think we’ve figured it out yet. You got an Apple TV hooked up to your 8600? Nice!
Super cool, converted it to 12v and boom! Auto connects to hotspot
-
Recently installed the beautiful DMH-WT8600NEX (the 10.1 display)
I can not for the life of me figure out how to bypass. There is an accelerometer or gyroscope of some sort that will not allow video in motion. Does not have to do with the parking brake wire, or the VSS wire. Possibly the GPS antenna, which I can’t just unplug because I will loose wireless carplay. Anyone has any success with a bypass on these newer units yet?
-
On 6/21/2020 at 6:47 PM, fshrlou said:
I’m happy to report that it’s been almost a day, and with multiple trips around town, the video is still working with the GPS antenna unplugged. Went to the 3D Calibration setting and it just says initializing. The double or triple pulse bypass and the GPS antenna unplugged, looks like that’s the winning combo for video all the time. Thanks for your ideas and input.
except wireless apple carplay does not workout without GPS connected correct?
-
On 6/8/2020 at 1:03 PM, Hawknbyrd said:
Have you figured out what wire it's connected to yet. It's driving me crazy i can't bypass
same
-
On 6/14/2020 at 8:51 PM, mapotter99 said:
Anyone have any inside information for how to bypass the new NEX models (DMH-WT7600NEX and DMH-WT8600NEX) with the new software?
The old trick doesn’t work.
Same! I have the 8600, trick won’t work. Having a hard time getting video in motion.
DMH-WT8600NEX bypass HELP!!
in NEX Series
Posted
that browser is trash. Hook up something to the HDMI, I use an apple TV