MisfitToy

Posting for others who may encounter this problem. Issue was with the dashcam's video output and the RCA cable. Had to buy an OMTP to CTIA converter/adapter. Long boring story later, not all RCA cables and video outputs are the same. Some swap the position of the ground and video signal. After the adapter, video signal was carried over the red RCA instead of yellow and the dashcam now displays properly using the 2nd cam input.

Thanks. That's what's not working tho. Dash cam will display on AV input, but when Input is set to Camera instead of Source, dash cam video doesnt display in Camera View along with BU cam. I get the icon for camera switching and it works, but only switches between the BU cam and a blank display.

@bonee Thanks. I was just coming to update that I set to Source and forced video setting to NTSC. Dash cam now outputs on AV. I want Input set to Camera tho. Goal is to be able to swap between dash cam (front camera) and backup cam (always hot with acc) using Camera view.

Hi all. 2nd camera input wont display image from dash cam. Installing a Viofo A118C on the AV input (yellow RCA dongle) of an 8100nex. Already have a Pyle camera connected to the backup cam input (brown RCA). BU cam works fine. I cant get the 2nd cam input to display the dash cam in any view (camera view or AV input.) If i switch the inputs and plug Pyle into yellow RCA and Viofo into brown RCA, both work, but then my back up cam trigger shows the dash cam video. I've gone into settings and made sure all are accurate (2nd cam on, etc.) I've also confirmed cam formats are se