Iggyg00

Hello, I have installed a avic z110bt and have no idea where the vss wire is. Couple of questions first what does the signal have to be voltage wise? what does Nok mean on the signal screen if you go into the nav settings The reason i ask is that i hooked it up to the speed sensor coming off of the transmission and it basically shows me going really really fast when i am driving then the signal screen shows NOK. I unplugged it and now the nav works. Any one know what type of vss signal it is looking for?do i need to hook it to the vss signal in the abs system? Please hel

IT WORKS...... IF any one needs help or busts there pin assembly let me know i can take my other harness apart as i bought a new one. One thing that i noticed is that on the top of the connector which inserts into the unit there is a open rectangle above every pin opening. In this opening there is a small section of metal that is locking the pin above a plastic ridge in the connector. If you pull the wire out without pushing this back there is a good chance you will break that piece of metal and then it wont make a good connection when you move it over. Another thing is that these connectors a

Well I went to Nortons in colombia... PeterSC if you go make sure you have them test it with there display model wires while you are there. All I can say is i love this unit...

Well drove to columbia today and exchanged it with no problems basically slide the old one out of the dash and installed the new one right there. The only issue is i still have the old harness and the white connector is pretty beat up so im going to buy another one from pioneer to do the mod. Thanks everyone for the help im sure i will have some more questions as i get the mod working. I like the N3 where you just bent a paperclip and moved a switch under a label and everything worked lol

i was going to say because that would of reduced me driving 1.5 hours to columbia to get a replacement lol. O well road trip tomorrow when i get off of work, hopefully they just swap it out for a new one since i have only had it a day and the mechanism never worked on the front

Where is the norton in greenville?

Hello, THank you for the info... Couple more questions: 1. Is there somewhere I can buy new harnesses for the unit as the ones I have are getting really short? or should i just return the harness with the unit and get new ones?

Know i have a bunch more questions because it still is not working. 1.What type of connectors is everyone using? I bought some shrink tubing with what looks like solder in it, as you heat it up it melts and shrinks. would this cause a connection issue? 2. Does everyone have there reverse wire hooked up? would not having this hooked up cause an issue? 3. How do you insert a disk? I have tried the following pressed the eject button which brings up that bar on the bottom of the screen. I pressed the open nothing happened, the tilt buttons look to be grayed out, and the insert SD card does n

ok Im having issues with this bypass and have a couple of questions. This is what i did so far.... Moved MUTE wire one over on the white connector tied that wire and the brake wire to ground on a piece of the truck Know the question i have is when you go and drive the vehicle is your brake showing on all the time in the navigation settings section. I have been at this for 5 hours and its starting to really bug me...... HELPP.....