Mazda3Driver

Hopefully somebody can help me out with this. I went ahead and downloaded the bluetooth fix through Ducati's site and Rapidshare. I saved the compressed folder on to my desktop and then uncompressed it and burned the uncompressed folder onto a cd. I inserted the cd into my z1 and all it said on the screen was that a cdrom was inserted. I tried just putting the actual file onto a cd without the folder and it stated the same thing. I tried putting it onto a dvd and it still didnt work. What could be the problem? I hate having the bluetooth in my car and not being able to use it. Please help som

[i]07/06 Bypass (for units made in July 06 and newer when the flashing method above does not work, some July 06 units might need to be flashed or have a flasher circuit installed, some might need the bypass below. August 06 and newer should only use this bypass.) For these models you will NOT need my circuit, all you need to do is just ground 2 wires. Wire #1: Ground the parking brake wire. Wire #2: Look on the back of the Z1, there are 3 main connectors. As you are looking at it from the rear, the connector on the bottom right (closest to the FM antenna plug) is la

Thanks a bunch....I do have the parking brake grounded. I'll disconnect it and tape it up.

I own a 2004 Mazda 3 and purchased the Z-1 in early August. And I believe I have a Newer model Z1. Heres my problem and hopefully someone can help. Earlier this month I had my Z1 running withouth the VSS wire connected. I did the light flashing and it worked well at least I thought it did. It worked for about 20 min. then the parking brake warning came up and the bypassed features stopped working. I thought that not having the VSS wire hooked up was the cause of the shut down of the bypass. So I hooked up the VSS wire and now the bypass doesn't work at all. What can I do to fix this issue? I