DonTat

Well I got it un-bricked following biker's advice on holding the resets for 20 seconds or more. I am back at 2.06 and it seems to be working ok. Now I have to decide if I should load up the unofficial 3.0 upgrade or leave it alone now that it is working...any thoughts?

I tried the steps outlined by Biker90. After step 7 the unit would not restart. It would go to the "Pioneer Screen" and just sit there. After a very long time, I tried hitting the menu or map button. It would go to the initial screen (the one with destination, etc) and stop there. Tried each type of reset but no joy. I tried to get into Windows CE via test mode and it would go to the Windows CE blue screen then immediately go black and the whole unit would shut down. I have done all manner of trial and error I can think of but nothing is working. Anybody have any ideas?

Thank you.. You put a lot of work into this. I've done everything you mentioned except you have one additional step. I have not seen the 4shared_desktop file before. The next chance I get I will follow your instructions and see if that file makes a difference. Thanks, Don

I did the "unofficial" upgrade to 3.0 as I did not want to pay for the upgrade until I was sure it worked. I have had the reboot, lock up problems many others have had. I have since gone back to 2.06. My system is the f90. I have gone through every post in the forum and tried the solutions I found such as deleting files and folders. I have done a clean 2.0 install from the files on the forum, done the 2.06 upgrade then the 3.0 upgrade. I still have the same lockup and reboot problems. Has anyone been able to resolve these problems with the official upgrade. I don't mind paying for the

I am having similar problems but they are bizarre. I get lock-ups and the reboot loop. It only happens on freeways, not surface streets and in similar locations on the freeways I travel regularly. I can't help but think that it has something to do with what is being written to the screen. I have tried the various deleting of files that is recommended in the forum. Here is what I plan on doing on my next day off...If anyone has any other ideas I should consider, please let me know: Reinstall 2.0 using the clean files available on the forum Do the 2.06 upgrade Do the 3.0 upgrade Inst

Thank you, that makes sense.

Is there a thread that talks about how to edit the locations of the speed cameras. There are several indicated in the gps that don't exist on the actual street. I tried the delete button but that does not seem to work.

I've noticed a few things in 3.0 that I never saw before. One road had flashing yellow lines parallel to it on both sides with small yellow circles with the number 30 in it. This road is not under construction and the speed limit is 45. I see this at all times of the day including 5:30 am when there is no traffic. Also, on freeways I see a bunch of green dots. They don't seem to correspond to anything except maybe off ramp starting and ending points. I was wondering if there is a pdf or file somewhere that has all the changes 3.0 delivered. I searched the forums and there wasn't an

I just got a little lost...I've seen in posts that several people with f90bt have done the 3.01 upgrade. am I misunderstanding? Should I apply this 3.01 upgrade you included the link for to a f90 if I already have the 3.0 upgrade? Sorry, don't mean to be dense...but probably, I am

Thank you, that page says that it includes the 3.0 update...does it include the 3.01 update as well? Somehow I thought this was a separate download...am I wrong about that?

I have had exactly the same problem since doing the 3.0 update. I have followed the advice from Smovva and Vegaslaptop but neither solution has worked. Has anyone come up with a solution to the reboot cycle problem? Don

Hi, I have done the 3.0 upgrade and have seen references to a 3.1 or 3.01 update. I cannot find any reference to this update on Pioneer's site. The only references I can find to it on this site don't mention where to get it or the links referred to are broken. I have the F90bt. The 3.0 upgrade went great, thanks to all here for there help. Is the 3.01 update for my unit? Do I need it? Where can I get it? Thanks in advance folks. Don

I have not been on this site in a long time and was surprised to see the information about the 3.0 Upgrade. I have a F90BT. When I went to 6th Ave as some of you have recommended, the only Pioneer upgrade I can find is described as "Pioneer CNSD-150FM Map Upgrade for AVIC-F500BT Navigation System". Is this the one I want for the F90BT or is there another one I have not yet found. Thanks in advance, Don

For my part: Boot improved like everyone else Bluetooth with Blackberry Pearl flawless now - didn't work before at all IPOD doesn't lose connection Problem 1: VR does not work when it did before. Will not recognize a call command, will not read all IPOD commands past initial few words: IE: Play the Artist Chicago becomes playing all artists. Problem 2: Volume button functions are inconsistent: (May be tied to #1 above). Does not mute, does not always bring up the VR menu, erratic when zooming in map, sometimes doesn't, sometimes zooms the wrong way, sometimes zooms too muc

Sorry, I meant after doing the 2.0 firmware update.

I am having problems with voice recognition since the update. The phone works great so I know the mic is in a good place and is connected right. When I say "Play the playlist don's songs" I get "showing all playlists". Same thing with artists, albums songs, It only hears the key word and lists the whole database. When asking it to call someone, it goes back to whatever song was playing. (I have not edited my telephone lists yet so this may be the problem there). Anyone had anything similar and been able to find a fix? Don

I am also using MSN in the Phx Metro Area. When it works, it: 1. Puts an icon on the map showing congestion or accident 2. Colors the road red when congestion tied to the same entry showing the icon appears. 3. Shows different icons for congestion or accident 4. On the MSN screen provides a list of incidents, accidents, congestion and road closures that is easy to read and navigate. Sometimes these notifications are quick (I am on the 101 and see the icon before the incident), sometimes they are not (I am on the 101 crawling along and then see the icon further along on the map

I have tons of gas station icons all over my map I suspect this is from MSN rather than the unit's POIs as they are different colors which I think represents their prices. Anyway, I have checked manual and all POI settings I can find and they are all turned off. I seem to remember a post in the past about this. Has anyone found a way to get them off the map? Tks, Don

I too have had a 90 for about three weeks. I sometimes debate exchanging it for a kenwood unit but there are too many things I like. Your concerns: Boot time: Well, it's not instant on. ON the other hand, the Tom-Tom I used to use took a little while to get itself going. It is about 15 seconds to music, 30 seconds to full use, maybe a minute at the longest for me. Nav Orientated North: Previous answer says it all. Sirrius: Don't use it Bluetooth: I also have a blackberry although a different model. When it works, it works great but it drops and reconnects all the tim

In another post I saw that someone removed any duplicate contact entries and this resolved the on and off bluetooth issue. I tried it and although I have no idea what duplicate contacts could possibly have in common with bluetooth, it worked. Blackberry Pearl Don

When I start my f90 the IPOD cataloging starts and will not stop. When this is going I have only limited control over the IPOD and no voice control at all. If I turn cataloging off, I get control back. But, turning it off doesn't really work for me. I listen to a lot of podcasts and update my IPOD all the time. Does anyone have any idea what the fix for this might be? Thanks, Don

Thanks everyone. One question that came up is the mounting bracket and wiring harness for my car. Both Crutchfield and SonicElectronix advertise that they include the harness and bracket for my car at no extra charge. Other companies do not mention this. If it get it from al-ed's, or an amazon site for example, do I have to purchase the wiring harness and bracket somewhere else? If so where? Thanks, Don

I will probably be ordering a F900 today or tomorrow. I was thinking about Cruthcfield or Sonic. Sonic is less expensive but Crutchfield support seems a little more detailed. They both offer wiring harness and mounting brackets etc for my 08 Nissan Altima. Does anyone have any thoughts about these dealers or any others? Thanks, Don

I wonder if the inefficient code writing is contributing to the boot time? Don