Jump to content
AVIC411.com

harricanfloyd

Members
  • Content Count

    11
  • Joined

  • Last visited

About harricanfloyd

  • Rank

  1. This is a very old topic. I Recently bought a used D3 and installed it in my Jeep. Instead of the old 12v is 12v system like in older cars, I had the canbus system found in most cars today. that required a integration harness. I ran into problems when the "drivers" door was not closed last...weird. If is wasn't exact, you would get in the car, fire her up and No sound... Sometimes I had to pull over, shut the car off, open the door close it, and fire up the jeep again....voila, sound. I ended up changing the Metra harness with another from Axxcess and I've never had the problem again.
  2. Why the hell can't I get any sound out of my D3. Wired speaker outputs are fine. I did a search, tried the bypass, the initial menu etc...nothing. I have a old fosgate punch 100 that I wanna use to power up my system in my 99 mustang. I want to bypass the mach460 stuff power the door tweeters off the deck, the punch will drive 4 6x8's and the bass tube will have a LPF on it also off the amp. Right now, I cant' get any sound out of the rca's tho. I tried front, rear and sub pre outs. I even tried to wire up sub out only to an amp with the "wired" speaker outputs and I still got nothin
  3. harricanfloyd

    btb200

    NE one have one of these for sale for a reasonable price. I cannot post in the FS forum.
  4. What's up with my avic? Every time I plug in the ipod I will get stuck on the splash screen. it'll just brick. When I unplug it, and re boot, it works fine. it is running 2.0, so it's sluggish until everything boots up.... HA! dont even think of leaving the SD card "on" when u turn the car off. Ten minutes later, music starts playing. I'm hoping when I finally get the gumps to do the firmware upgrade, it will fix alot of this.
  5. what's up? Just wanted to know if anyone is having trouble with their f900 and the ipod interface. If ipod is plugged in....it'll brick. No matter if I start it with the key or plug in the ipod after the unit has powered up. If I unplug the ipod, I have full functionality. I have replaced the ipod cable....and tried another ipod....same problem. By the way...I have not upgraded to 3.0, but 2 hasn't given me any problems other than this...
  6. Hi, What is going on with my F900? Version 2.0..... This thing is so slow to boot up....SD take almost 5 minutes to start playing music. To get any sound, I have to start the 900bt in "radio" or "XM" mode. If I start it in SD, I won't have music 5-10 minute into my ride. Also, it doesn't even "see" the ipod. When it does, I get a continous re-boot or it'll just freeze on the splash screen. The ipod is fine as it plays fine in my D3 Any help would be appreciated!! TIA!!!
  7. Constantly looses sound. Ipod make the avic go crazy and reboot. When Ipod is disconnected, it works fine. Sometime it does not "see" the usb or ipod. I already bought a new interface cable.
  8. Hi to all, Well the time has come to jump on the bitchin' bandwagon! My 900 was rebooting every 4-5 minutes. I try resetting it, but it didnt' work. Once in a while it would come on and play, but had very slow touch screen response. I even bought another antenna and tried the TestMode. It didnt "see" the SD card. I unplugged my ipod and it started working......every time I plug in the ipod, it goes right to the splash screen and stays there......its either the ipod interface (wire) or the ipod itself. HUH???? For now, I am gonna put my music on a SD card....see what happens. I reall
  9. Ok peeps, just for the record I am not an installer, but rather an enthusiast. I wired up my camera today to my d-3. From the rear backup lamp I ran a hot 12v wire to the rear camera input wire on the D-3(purple w/white stripe). The camera itself has power from the ACC wire, or switched 12v. When ever I put the truck in reverse it comes on. If I am playin my ipod, the music doesn't stop, the pic just changes.....what a pain in the ass tryin' to get that camera straight! Anyway, I don't know if it's right, but it works.
  10. What up. I have a new to me D3 I just bought and installed on my 05 Grand Cherokee. It looks good But I need help locating the can-bus pin outs on the factory harness. I trying to regain my steering control for my radio and Ipod
  11. YOur a talented guy. I like the chrysler navigation pic, but do you have anything alone those lines with a grand cherokee? or a cool Jeep Logo? Thanks
×
×
  • Create New...