Jump to content
AVIC411.com

Jojeli

Members
  • Content Count

    29
  • Joined

  • Last visited

About Jojeli

  • Rank
    Member
  1. Thanks for the tip! I will take a closer look into this.
  2. This is different problem than mine, as I get my iPod to work again just restarting AVIC, no need to do anything with iPod. Its just annoying because AVIC boot time is slow, I've already driven one km from home when I recognize that iPod connection is not working and I should stop and shut down whole car to make it work again
  3. I have EU version of Avic F-900 which has strange problem, that sometimes it doesn't start properly: when audio starts during bootup there's random interferences in speakers,v like AVIC were taking interference from some other electric device and touch screen is completely unresponsible, only harware buttons work. After I power off avic and power it back, unit starts up properly. I'm currently using V3 software with IDT Mod, these problems have been present with unmodded V3 too, unfortunately I dont remember if they were present with V2. Has anyone else this problem?
  4. Thanks for your suggestion, I've already tried couple of times to hard reset my iPod but it didnt help. When AVIC interface language is changed, avic asks if its ok to reboot and if clicked "yes", it reboots without losing audio settings, so it should be somehow possible
  5. I have small problem with my AVIC-F900 and IPod; sometimes when I start my car Avic doesn't recognize my IPod, unplugging and reconnecting IPod doesn't help at all, so problem is not in loose connection, only way to fix this is restart AVIC. As there's no power button in AVIC, only ways to restart it is turn car on and off (not very useful) or press reset button in front panel with stylus, which clears all audio settings in AVIC (not useful too). Is it possible to programmatically restart AVIC without losing settings, or is only way to do this to add switch between AVIC power line?
  6. the the map is responsible for the house numbers, what i currently do with my EU release is i just switch the textmodels, 1) try deleting the contents of the saved folder and let me know if it works 2)the lane guidance is being covered by the signpost, everything is fixed on v4, next release will be up soon, 1) This problem is somehow related to system user interface language, when I change it to finnish, all street names show in finnish, when i switch to english, some street names show in swedish! This wasn't problem in iGo 8.0 when I used it with english language, I dont remember was
  7. the house numbers are included in the data.zip, pressing the current street will show the housenumbers and pressing the housenumbers will hide it Hmm...I tested this yesterday and house numbers show in wrong sides of street (I'm using your mod V3.5 europe), is this bug in mod or are house numbers included in map, so this were error in map itself? Also I have two other strange issues: 1. I'm living in Finland which is bilingual country (we have finnish and swedish as official languages). Somehow f.ex. most of streets near my home show in swedish, which is "secondary" language in F
  8. Thanks IDT for your great mods, especially for euro versions, which surely cause you lot of extra work! I will soon send you some cash for all your hard work. Your mod is nearly perfect, there's only two things I'm missing from your mods (I can propably add these by myself too): house numbers and different type of arrow showing route when navigating. viewtopic.php?f=34&t=26379&start=30 House number view in this mod is really useful, so maybe you will add similar function to your mod, too? Also, I tried this mod on my AVIC and although route arrow in screenshots of that thread is s
  9. Oops, I forgot one bug in my previous post. Street numbers are showing on wrong side of street.
  10. Ovalball, please download version 3 image found in this thread: viewtopic.php?f=34&t=26625 when you boot in testmode, before copying these files to flash disk, delete old folder APL2\IGO completely from your flash disk. If you just copy new folder overwriting old files, there may be still some old files leftover, which causes these problems. I had corrupted speedcam.txt-file in my flash disk which caused this same error message, and it didn't go away although I copied original folder from SD, as speedcam.txt file wasn't included in original folder, therefore this corrupted file still exi
  11. This problem is caused usually by nav part, so problem is most likely in APL2\IGO-folder. If you have clean installation files, try to delete this folder from your flash disk and then copy clean one to flash disk. If you just copy new folder it doesn't overwrite existing folders completely; if there's files in existing folder which aren't in folder being copied, those "extra" files are left to flash disk, which may cause problems. I found this by myself when I copied corrupted speedcam.txt-file to my flash disk; my avic stuck on "system startup in progress"-message, even when I copied original
  12. Hi Sven, thanks for your mod, its very nice and I will definitely stick with it when bugs are fixed. Bugs I've found so far: 1. I cant see sky in 3d mode and cant tilt screen enough to see it, could you post content of your sys.txt, I think we need also image file that you're using as sky background (or is it included in data.zip?). 2. I cant get current speed show clicking on upper part of screen, this is possible caused by previous bug (because sky isn't visible). 3. When I set bottom info screens at left corner that lower part shows distance to destination, distance and mea
  13. Hmm...only difference between your code and PPCWarez-code is that inside SPRITE-tag you have set variable phasemodel="navigation.current_speed_limit" but that variable is completely missing in PPCwarez example, could that be the problem?
  14. It looks like that with iGo 8.3 you have to use different code for displaying f.ex. speed limit signs. I tried to google with variable name "navigation.current_speed_limit" thats used when displaying speed limit signs and find this code example in other forum: http://forum.ppcwarez.org/viewtopic.php?p=417615#417615 in 2.0 mods code was: phasemodel="navigation.current_speed_limit" in ppcwarez-forum code was: textmodel_wstr="navigation.current_speed_limit.number_text" So that's propably first change that should be done when converting speed limit sign codes to v3. I'm too busy to t
×
×
  • Create New...