impulsive.ca

Make sure you have the proper back-up files for your unit. Just search in the forums and find the ones you need. The SDMLC re-flash process is what fixed my head unit, so I'm guessing the rest of you are just missing the proper files that are supposed to go in the 'My Flash Drive' once you're in Testmode.

Fixed thanks to this thread by Tail24: viewtopic.php?f=33&t=25465&start=0 Unbelievable!! Thanks again man.

This just revived my F90BT. Absolutely fantastic write up man! Thank YOU!!!

As title states, Looking for VIRGIN WinCE 2.0 files (img, cks). I've looked throughout this site for a good link, but so far everyone just has either 2.06 or 3.0, none of which I need right now. Any help would be greatly appreciated.

i reinstalled win ce (format), transfered the files over from a completely different card using test mode.. still doesnt do fawk all when booting on its own (no testmode). black screen. hooray!!!

I re-copied all the files from the x910 folder (apl, apl2, etc...) on to a completely ereased flash disk on the F90BT unit. The unit still doesnt boot after a reboot (holding eject for 10 seconds or not). This is driving me insane! Im going to try and re-install everything, WINCE image and all 1 more time. I have doubts itll even do anything though. FAWK!!!

alright, i'll do that as soon as I can. Will post back with results this evening.

should i do another wince format first? or just delete the files on the unit's flash-drive and copy all the x910 files back on it?

Alright, so I did everything as instructed in the WinCE 3.0 update thread to a tee. I got the new WinCE img in using service mode, was able to get into test mode 2.3 and transfered the files over (x910 backup) and the 'data' files just fine. I reboot the system, took the SD card out, pressed reset and eject (as instructed) and hoped to see a nice Pioneer splash screen come up. Yeah, instead I get a black screen and nothing else. The unit stays on though and doesn't shut itself off after 15-ish seconds. The only thing I did that I -think- I may have done wrong is transfered the conte

Thanks fellas. I'll give this a shot this evening once I get home from work. Will keep you posted!

Alright, I was finally able to stay in a stable Service Mode screen. I updated the winCE img using the one from the 2.06 firmware update. I rebooted the system with an SD chip inside with the Testmode folders. It comes up with an error message regarding mapDBxxxx. roughly 3 seconds after the error message, the unit cuts again like the previous fashion. What now...

Well, so much for that. I'm able to get into service mode, but the unit shuts off after roughly 13-15 seconds. No matter what I do, the unit simply turns itself off (yet the cooling fan is still on? wtf) after a short amount of time.. No where near enough time to do anything. FAWWKK!!!!!!

I'll give service mode a try. I'm pretty sure I can do a WinCE update and get back into testmode. If I can do that, I can load up the OEM files and fix the system properly. I'll post up the results as soon as I can. ...Fingers crossed...

Nope, testmode initializes fine, then just as it's about to finish the unit turns off. And I mean completely off.. the backlit buttons, screen.. everything goes black. But I can still hear the unit's fan spinning, meaning there is power going to it. I want to contact Pioneer and ask them what to do, but as it's a civic holiday here in Canada, they're closed.

13+ views and no reply? c'mon guys...

Here's the problem: I installed an AVIC-F90BT (premiere) headunit a year ago. I performed the Pioneer Firmware upgrade to fix a few of the popular issues (bluetooth, boot-up time, nav bugs, etc.. as it has its own built-in flash drive). Everything worked perfectly afterwords, until about 3 months ago when I noticed the headunit would never remember what screen/menu it was at last when I'd turn the car back on. It remembered what source to use, but would always boot-up in the main menu instead of going to the source screen/map or where ever it was before I'd turn the car off. I had

I've got an 8GB SD card.. No idea how to go into 'test' mode. I haven't modded this unit at all other than the connector plug-in for setting the GPS and viewing DVD's while driving.

PM sent. I've contacted Pioneer regarding the issue. I'd prefer not having to send them the unit, so any help would be greatly appreciated at this point. Keep the advice coming!

I've had my F900BT for roughly 6 months now and it has been working perfectly since the latest firmware upgrade. That is, until now. I was just about to go on a small road trip, i input my destination and all of a sudden the system rebooted. Then rebooted again, and again, and again... After numerous physical resets, removing the radio fuse.. nothing's worked. It displays the 'now loading' screen just fine, makes its way to the main menu with the 'system starting' pop up...then reboots. I've disconnected the SD card I had in there (Music), disconnected bluetooth and made sure no disc was

no one has this problem other than me!?

I recently purchased an AVIC-F900BT and have found that either my phone doesn't like it (Sony Ericsson W810i), or the headunit doesn't like my phone. I can manage to connect to the phone once I do a new pairing, but once the car is off and turned back on (let's say, after I'm done work), the unit keeps rebooting over and over again once the connection to my phone is made. Which cancels the connection and makes the unit basically useless. I think it has to do with the downloading of the contacts or the syncronizing, although I have set my phone to 'always permit' the F900BT's access.

No one can answer this?

Alright, so I'm looking to get the SIRIUS Sat-Radio service. However, I'm a little confused as to what I need to get before I go ahead and get the service. Do I need to buy the SC-C1 universal tuner? Do I need to buy the Pioneer Adapter (CD-SB10)? Or does the D3 already have a built in one? where I can just plug a tuner in? Any help would be greatly appreciated.