Jump to content
AVIC411.com

ICEMAN 316

Members
  • Content Count

    14
  • Joined

  • Last visited

About ICEMAN 316

  • Rank

  1. Quick question.. If i want the Sky in the 3D view in the instruction it says to remove the semicolon in the [maps]. I went in the system.txt but I didn't see any semicolons except for the title [maps] so do i take the title semicolons out or was this download already updated to show the sky in 3d mode? Thanks guys..
  2. Mine comes on in about 4-5 secs.. not bad at all..
  3. F-Series Model: F90BT Phone make/model: Sprint Blackberry 8830 Ease of Connection: Easy (Use the BB to connect to F90BT) Phonebook Transfer: Works Sound Quality: Perfect (better then I expected) Comments: As everyone knows pre 2.0 update the Blackberry's would connect and disconnect every 10 secs. But after the update it works perfectly. I put my mic on the driver side visor and it works great there. I had a little echo problem but after turning down the volume a little there is no echo problem now. The calls are clearer then using my Jawbone from both ends of the call.
  4. No Prob. Glad you got that fixed..
  5. Did you connect the blue antenna wire on the wire harness to the pioneer blue power antenna wire? I forgot to do that with my Scion and I wasn't able to get AM either but after I connected those wires everything works. But I still feel the stock scion radio gets better reception.
  6. I've changed the daytime and nighttime Map color settings from Pioneer Blue to red and back to blue but don't see a difference in the map Can anyone help me with this? Thanks
  7. I get pretty good AM but I think the FM is not as good as my stock unit. It gets static in places where my stock HU was fine at. I've read that some people connect the antenna wire to the ACC wire to get more power to the antenna amp. Can anyone confirm this will work?
  8. I get pretty good AM but I think the FM is not as good as my stock unit. It gets static in places where my stock HU was fine at. I've read that some people connect the antenna wire to the ACC wire to get more power to the antenna amp. Can anyone confirm this will work?
  9. I just tapped it in to the ACC wire on the harness and it works fine. Make sure you get an antenna splitter.
  10. From what I read on this forum and the scionlife forum all of them said the reverse wire is only needed if you are installing a reverse camera. I didn;t tap in the reverse wire on both of the scions and they both are very accurate. I only tapped in to the VSS Wire. Just trust me just tap the VSS Wire to the Speed wire on the scion and you'll be fine.
  11. Tried it and didn't work.. anybody else have suggestions?
  12. I just installed the F90BT on my 2006 xB and a 2009 xB and you don't need the reverse wire tap unless you are installing the reverse camera. Also you do need a dash kit.
  13. yup my Sprint BB 8830 has the same problem..Anyone find a fix yet?
×
×
  • Create New...