Jump to content
AVIC411.com

ebbro

Members
  • Content Count

    24
  • Joined

  • Last visited

About ebbro

  • Rank
    Member
  1. Haven't been on this site in years - my unit is acting up. I could use a 3.0 link as well.
  2. I used one of the photos on this thread and modified it to add a nissan logo - it's 800 x 480. When I install from USB the picture comes up and shows full screen with the "OK" at the bottom right. I select OK, and everything seems fine, however next time I startup the screen is about 1/3 normal size. Anyone have any suggestions? I did this before with no problems, but had to re-setup after my system crashed. I'm not using the same file, but I am using the same picture, which I got from this thread. Edit: figured it out - somehow the photo was 802 x 482. Weird that it showed ful
  3. Just wanted to give a huge thank you to Retell for this. My unit had a fatal application error and shut down. After that every time I turned it on I got the splash screen, then it just went black. I spent about 5 hours researching this site but was never sure exactly what to do or how to do it until I found the link to this thread. This worked perfect and I'm back up and running (with some cool mods btw). Saved me $200 bucks (I can't believe Pioneer would charge that much for something that would be so simple for them to fix). I just had to delete Canada and Hawaii maps to make it w
  4. I know this is an old thread, but I have the same problem except my unit doesn't continually try to rebood (it just tries to start, then goes blank) and I have version 3.020100. I accessed testmode w/the USB version of testmode v2.3. I get the same symbols in the myflashdisk folder. Where can I get a backup f/ my version? Is it a matter of copying files from the update SD cards that I have or is there somewhere I can download it? I"m not very experienced in this - I never modified my unit, this just happened one day after a fatal error message was received. Any help is greatly ap
  5. I've had my Avic 700bt for nearly two years w/ no problems. I upgraded to the most recent firmware many months ago, whenever it was released. Today I got a fatal application error while the unit was starting up. I didn't have time to read it all before the unit shut down, so I don't know the details. I've tried restarting it - the splash screen comes up for a bit and then the unit just shuts down w/ no message. Searching on the forum it seems most of the errors that result in similar shut down happen during the firmware update, which is not my case. Does anyone have any thoughts or
  6. I tried searching for this because I know I've seen it in the past, but I can't seem to find anything. Side note: people keep getting on people about searching, but I find the search engine on this site not to be very good - am I missing an advanced search feature somewhere? I think it would be helpful. Anyway, my navigation suddenly stopped working after I had to reset the unit for some reason - it won't pick up the satellites and showed the last know location near my house. It won't come back by resetting or restoring factory settings. Has anyone had experience of antennas suddenly
  7. ebbro

    Voice Control

    All my voice commands work perfectly except when trying to call someone. I don't get a call to the wrong person I get..."I didn't get that. Please say the name or number you wish to call." I can't figure it out.
  8. Did they give you an invoice? My shipping notification came w/ an invoice. In the "Carrier" section there is a "PRO#" - this is the tracking number. My card was charged when I ordered a month ago. Mine is supposed to arrive today.
  9. I recently had to reset my unit to factory settings and I can't remember how to set the unit so that whatever I'm listening to at the time is not muted when the navigation voice chimes in w/ some instructions. I can't seem to find it in the manual (or by searching this forum). Can someone point me to the manual page or tell me how to navigate to that settings screen? TIA
  10. Happened twice to me. First time I reset factory settings on the Navigation settings screen and it worked fine. Second time was this morning on the way to work - I haven't tried anything to fix it yet though.
  11. Mine has done the same thing, but only 2 or 3 times since I've owned the unit (today being the latest). Only solution I have is press the 3D button to get it back in 3D.
  12. Seems like the VR should work then, but it doesn't f/ me.
  13. Mine only shows the numbers as well. I don't get how the contacts can show names and mobile/ home/ office, but the caller ID can't.
  14. I just stuck mine to the headunit - works fine.
×
×
  • Create New...