enkrypt3d

Well it's not as easy as your regular camery. I have it in an Acura NSX and removing the head unit requires special skills without damaging the fragile console....... Should there be any special wiring other than the camera going to the reverse light's positive & negative wires? The camera only comes on part of the time.....

yep tried ground and battery with no change. I've also tried all the other options. And I reinstalled the firmware. The unit still starts with a black screen. Makes no sense. Maybe I should try pulling the battery?

Ok thanks guys for the help.

All the main links in the OP are dead. Any updates? What is the latest with this post?

Anyone?

Hey guys I have a 6000NEX and every time I start the car, it starts in the rear view camera mode, but the camera is not on, just the message that says "image may appear reversed" and the rest of the screen is black. The only way to exit this screen is to hold the map button. There is no X on the top right of the screen. Anyone know how to fix this? I've looked through all the settings and cant find it.... Also I have a 2nd screen that is set to video out, is there a way to use the 2nd screen for a rear view "mirror" mode by the camera and have the main screen the navi etc? thanks!

Dude u dont have to take it out of the dash - just reinstall the OS - in WinCE - Start > Settings > control panel > storage > format partition and then copy new files (when u format u are blowing it all away including POI's maps etc and the entire OS so reload it w/ 4.01. and ur done

Make sure there is nothing plugged into the unit when you are doing this stuff. I had this problem when i had my 64GB USB drive plugged in.... even when I try to start it up with it plugged in, it takes a lot longer for the unit to start.. but if I unplug it the system starts faster. HTH! Thx

Feel free to post my link in your original post thanks!

http://avic411.com/index.php?/topic/22876-fresh-30-install-on-f90bt-with-pictures/ Guide...... pretty easy to find..... I've used 4.01 and it works great here is my mirror....... http://www.enkrypted.com/4.01.zip DL this for 4.01 upgrade. Be sure to update WinCE the same way as the guide says above.

Feel free to post these on the original thread (my mirrors) Thanks!

I was on 2.0 when the rebooting problem happened... then I copied 3.0 over 2.0 and it worked so I went and updated winCE for 4.0 then updated to 4.0..... works great! http://www.enkrypted.com/Avic_Files.zip Here is a mirror for the torrent file that I posted for everyone to share. Hope this helps thx

http://www.enkrypted.com/4.01.zip Here is a complete 4.01 upgrade package.... you really dont need anything else.... update WinCE and then install this the usual way. Includes latest maps & 3d buildings... for North America. Thx enjoy.

Its caused by software corruption guys not a hardware problem - http://www.enkrypted.com/4.01.zip Unzip this to an SD - update WinCE (Format) then copy the files from the SD to the my flash disk....... hold the reboot button for 5 seconds then you're all set. 4.01 rocks!

http://www.enkrypted.com/4.01.zip Yup just got this loaded and used the latest maps I could find (2012) and 3d buildings and it works great....

http://www.enkrypted.com/4.01.zip Unzip this straight to the SD card and update WInCE first (Format option on the top) then load the files into the my flash disk as needed.... good luck!

http://www.enkrypted.com/4.01.zip Hey guys instead of using 2.0 or 3.0 use this to fix your rebooting issues........ 4.01 is so much better than 2.0! this also includes the latest maps & 3d buildings... for North America. THX! Enjoy EcoCav, when booted into WinCE mode, go to start > control Panel > storage > and format the first partition. Then copy the contents from your SD card to "my flash disK" under "My device"....

http://www.enkrypted.com/4.01.zip Here is a mirror of 4.01 for USA with the latest maps, buildings and it works like a charm. Also includes the latest WinCE Image so be sure to flash that as well. All fits on ONE SD card! Enjoy!

So why doesn't 4.0 come with the updated maps for USA? It doesn't make any sense. Can someone please post a complete copy of 4.0? Thanks!

I tried using a 2.0 backup but it didn't work... so I did it again but this time I was able to get it working by copying the 3.0 backup files instead which upgraded me at the same time! Woot! Going to try to upgrade to 4.0.... but what does 4.0 provide since it doesn't come with maps? 2nd question is, since it doesn't come with maps, I should be able to copy the maps folder from the 3.0 to the 4.0 and load that right? Thoughts? Thx! My AVIC Boots up so much faster now too.... I'm currently uploading the files to my web server so I will mirror these files for everyone to share since

None of the torrent links work - it only shows a "fuck!@" on the page when I click on the torrent files........

Anyone have the files needed for this? My F90BT just started doing this..... Not sure what version I'm on...... And if I find 3.0 would installing that fix my problem too? Thx!

I saw that Pioneer was selling the 4.0 firmware for the x/f-series avic head units but cant seem to find any information on it anymore...... and I don't see any how-to guides on how to install it..... Any ideas why this is? Thx

http://www.pioneer-rus.ru/eur/products/25/38/301/CNSD-200FM/index.html This says its more than just maps dude....

subscribed... I dont get it though..... the update b4 this was 3.01... but the latest on their website says 2.0..... and now they're releasing 4.0? http://www.pioneerelectronics.com/PUSA/Products/CarAudioVideo/In-Dash/GPS-Navigation-Systems/AVIC-F90BT?tab=F I have 3.01 on my F90BT and hope to get the latest one on there... I'll buy it if I have to but not going to waste my $ if you guys can get it to work... thx!