Jump to content
AVIC411.com

Easty

Members
  • Content Count

    19
  • Joined

  • Last visited

About Easty

  • Rank

  1. Carver, can you please explain how you managed to veiw the code in the mainmenu file? did you have disassemble it or some thing? Dave.
  2. There is more of this text in the video EXE file. What line is this text found? (it's still in the av.exe file?) I searched for it, but couldn't find another spot where it was. It's around 06ba0 i replaced the caractors with spaces just like in the Av exe and the message is totally gone now even on boot up here is the file. Video.zip
  3. There is more of this text in the video EXE file.
  4. Programe one of your other buttons to perform theses functions just to trial it!
  5. You could! if the head unit supports it! it will take some messing around though! you'd have to measure the resistence to earth from your steering wheel control sw wire for each button that you currently have installed by pressing each button in turn and recording the values! and then pick a resistence different those values recorded, wire up your new switch with the required resistor and then programe SWi-ps accordingly. or you could just program say programe your mute or mode button as a bluetooth controll (any button you don't use often).
  6. You need to cut and paste some more files over! there is actualy two small carbon fibre images in my file to fill those wholes! they are in the AV file and they're called 746_32K_AV_SRC_TUNER_PCH_24b and 746_32K_AV_SRC_TUNER_FREQ_24b. you'll notice a slight miss match when you apply them if you look hard. you'll also notice one near the clock you'll need that too it's called 746_32K_AV-003_32b. Yes i replace it with a generic pioneer bar! Here it is you'll have to save it as bmp file before you use it! [attachment=0]746_32K_MN-001_24b.jpg[/attachment]
  7. i didn't do much at all with icons them selves, i got those from Guga's theme i love them he did a great job! so i took the easy way out! i'm still learning photoshop myself.
  8. Mate you'll need to use 7zip you can find it by googling it! and don't forget to rename the file to image.res after you have zipped it! I noticed this in my files too after you mentioned it. I've fixed it and included a pioneer title bar and updated the link above.
  9. By ui picks do you mean the icons? All you really need to do is unzip the image.res file using 7zip then copy your original icon bmp files and paste them in, to replace the ones you don't want. if you have trouble let me know!
  10. Hey sorry i took so long i'm still pretty new to Forums so it took me awhile to figure out how to up load the files. http://rapidshare.com/files/239472491/G ... e.zip.html Once you've unzipped the theme file you'll notice there's two files, image.res and a gps theme file. the image.res can simply replace the image.res file found in your APL folder. But with the gps theme file you'll need to copy the images files from within and paste them into APL2/igo/Data/ui_pioneer/800x480. When i get a chance i will creat a generic Pioneer, bottom title bar and post it. Enjoy Dave.
  11. First of all thanks heaps Guga for all your hard work! Let me know what you think! Dave. [attachment=5]IMG_9728a.jpg[/attachment][attachment=4]IMG_9728d.jpg[/attachment][attachment=3]IMG_9728c.jpg[/attachment][attachment=2]IMG_9728b.jpg[/attachment][attachment=0]IMG_9728e.jpg[/attachment]
  12. Hi, If some one could post an Dump file taken from an Australian unit I'd realy appreciate it! Carver has posted a write up on making a dump file this is how it's done; 1)Load Testmode 2.2 onto an SD card can get it here viewtopic.php?f=34&t=23632#p164539). 2)Place SD card into your unit and apply power, it will boot into Wince (this may take upto a minute or so). 3)Open DiskRW, it will be on your desktop! 4)select SDMLC in sourse, and SD card as the destination and press Read (for WinCE and config backup). 5)Remove SD card once it has finish reading (it takes may
  13. Hi carver it would be great if you could tell us exactly how you opened/edited your SDMLC image file! Did you mount it as a virtual drive?
  14. Nice work! this device possibly has the same micro processor we might be able to get a service manual for it. unfortunately i think it'll be impossible to convert from US to EW unless we can reflash it. i believe the micro processor has total control over frequency stepping/band and dvd region code. i think it Could also be possible to make a pic micro based mod chip for the unit to control the fm tuner and maybe to over ride the dvd region code. it would take some work but maybe it would be worth it sure a lot of people on here would profit from it. i had play with winhex and all i
  15. Carver yeah figured they would have the id code set! i didn't realy have equiment to try. i wonder if there is a pioneer utility built in that can reflash it like Uboot?
×
×
  • Create New...