jegonzo3

If I remember correctly, the 4100 you had to press OK for it to go away, with my 4200 it goes away automatically (after how long, I don't know, I haven't timed it).

I figured it out, hold down Mute.

Hi all, I need help! I'm installing a backup camera, but I'm testing it out first before I do the complete install and the screen is stuck (see picture). I have the AVH-4200NEX and connecting to a 2013 Mazda3. To test, I ran the video cable from front to rear and connected the power/ground into the backup light receptacle (I unplugged the connector and just stuck the power/ground into the two slots). Everything was connected, I started up my car, put it in reverse and at first it didn't work, so I went into my settings to make changes and it worked. So I turned the car off

You can always go to Crutchfield to see what they recommend, but you don't have to buy there.

Did you check some of the menu settings? You may have to change them when using Android. I'm running 4100, but I seem to remember something like this.

I would take it back and have him fix, at least, the AC issue. It's possible you may not be able to get the fader working. I have a Mazda3 with the Bose system, but I only switched out the stereo and my fader/balance work fine. What control did he install, in regards to the car temp?

thanks playa, taking apart my dash is really no big deal for me. I really don't add music to what I already have and if necessary, I'll just throw any new music on to my SD card.

Hi all, without removing my stereo from my dash, has anyone tried plugging in a thumb drive directly into the back of their unit? Or do we have to use the cable for it to work properly? Thumb drives are pretty small these days. jegonzo3

I've bought plenty of refurbished items before, I think you'll be ok.

Hi Clint, I don't recall how long it took, but it shouldn't take that long. I know you posted this about a week ago, so I hope you got it taken care of.

There is a firmware update for the AVH-X5600BHS and AVH-X3600BHS units (only) in relation to the SiriusXM units and the audio dropping out. Please read all information to determine if you need this update: http://www.pioneerelectronics.com/PUSA/Support/Downloads?utm_source=eMail&utm_medium=email&utm_campaign=02-2014_Car-AVHSiriusXM-Update%2520%281%29&utm_content= It is your responsibility to determine if this firmware update is needed for your AVH-X5600BHS or AVH-X3600BHS, as I received and email from Pioneer alerting me of firmware update. jegonzo3

Ha ha, thanks, I was just going to post it, as I got the email too!

I just replaced my AVIC-D3 recently and have a Samsung Galaxy S4, I didn't have any problems connecting to my D3. As for XM for the D3, the GEX-P920XM should work, as that's what I had with my D3 install and had been using it for years. I only had to go with the new style SiriusXM tuner because I got a new AVH-X5600 head unit. I no longer need my GEX-P920XM, so if you're interested in purchasing it from me, let's talk. Just send me a PM here. jegonzo3

For those of you still checking in on this thread, here is information in regards to my message to Pioneer on the SirusXM issue and having to reset the radio to get it to work. Thank you for contacting Pioneer Electronics (USA) Inc. I'm sorry to hear you are having this problem. It is an issue our engineers are working to fix. We should have a firmware update posted within the next week. Once posted, it will be on the product page. http://www.pioneerelectronics.com/PUSA/Car/DVD-Receivers/AVH-X5600BHS jegonzo3

Sure enough, like you said Jake, mine went out on me yesterday and I had to reset my radio. I've emailed Pioneer in regards to this issue.

Jake, I think I know what interface module you're talking about. I have one I am using from my old AVIC stereo (can't remember brand), certain functions did not work with my old stereo, but the functions seem to be working with the new one. I was planning on getting a new Axxess one, but I think I'll hold off for now.

Hey Jake, I'm not sure what harness you're referring to, can you elaborate a little more?

That worked, thanks Jake!

Sorry guys, I just noticed the replies to my thread and I've been sick for a week and a half. No, I have not gotten the tuner to work with my radio and I'm on my second tuner. Jaketime, I may try what you did and reset my unit to see if that helps. Can you tell me where the reset button is? Yup, I have signal, shows what song is on, just no sound. I'm about ready to return the radio for another one just to make sure that's not it. Is there an update for our radio? I'll have to look.

Hi all, Been a long time since I've posted, but I've got an issue with my new AVH-X5600BHS and SiriusXM SXV200v1 tuner. I've got it all installed, but the problem is with the SiriusXM tuner, I get no sound from it. Everything else works, bluetooth audio, HD radio, etc. Has anyone else had this issue. For those that don't know how the new SiriusXM tuner works, it has a small unit that plugs into the back of the stereo and an antenna connects to it, simple as that. Oh yeah, I do see channels and what songs are playing, just no sound. thanks, jegonzo3

Sorry for the delay, I didn't get notified of a reply. This is in a 2006 Nissan Frontier. If I take it into a shop, will they be able to run diagnostics on both the D3 and amp?

About one month ago, my D3 started having issues with sound to the front left speaker. If I turned the volume up, sometimes it would work, sometimes not. I thought it was blown, so I bought a new pair for up front, needless to say, same issue. Now, it's happening on the right front also. The rear speakers are working just fine. Just so you all know, I am running this all through a 5-channel amp. Has anyone else had any issues with their D3 like this? thanks, jegonzo3

Go to this page, http://www.avic411.com/forum/viewtopic. ... &start=105, and follow the instructions. Use MagicISO to extract an .iso file from the .uif and then use MagicISO to burn the .iso file to your DL dvd.

If you did indeed burn the .uif file to a disc, that won't work. You need to extract the files from the .uif, if I remember correctly, it creates an .iso file and then you burn from that.

Well that sucks, and I just bought a 6th gen iPod.