chazmink

Pioneer does make a double DIN install kit. http://parts.pioneerelectronics.com/par ... =ADT-VA133 I used it with my AVIC D-3 in my Saab 9-5. Also, consider this from Clarion: http://www.crutchfield.com/S-lva3VKPFMy ... I=0202DBKT Charlie

Wulf, That is a great write-up. I have a 2002 9-5 Aero which I installed an AVIC-D3 in a couple of years ago. I've reinstalled twice, changing the mounting bezel/sleeve each time to improve appearance. Most recently I used the Pioneer ADT-VA133 but I wish I would have known about the Clarion sleeve you used. It looks terrific. Cheaper too. Also, I didn't need to install a resistor to program the SWI-PS. Great job. Take care, Charlie

Ben, Mine works perfectly with my D3 and BTB200. It sounds like you did everthing I did. You don't have a BTB100 by any chance? They are not quite as agile.

Have you turned autoconnect on in the D3 menu?

I have the D-3 in my 2002 9-5 Aero. What I did was cut off the back of the existing cage and drilled holes in the side of the cage to align with the tapped D-3 holes. As far as cabling I soldered the D-3 cables to the adapter provided by Crutchfield. My Aero has the Harman Kardon Prestige sound with an amp so I soldered RCA plugs to the respective lines in. I have attached a spreadsheet with the color codes. I had an amplifier thump when turning the radio off which was eliminated by installing ground loop isolators in the audio lines. Another guy on this board installed a D

Once I got the phone properly registered on my D3 it has autoconnected reliably. Of course, that is ony one day's experience! Charlie

VBlue, Thanks for the tip. That's a good workaround. I sure hope Apple improves the bluetooth capabilities.

That has been my experience as well. I keep hoping for a breakthrough!

There are probably no absolute answers to this but can anyone speculate on how the new Apple iPhone will perform with the BTB200 and the D3? The iPhone will be released on June 29th.

That's not a bad idea. I'll have a look tomorrow,

I knew that was an option but was hoping to find an alternative. Thanks, again.

I appreciate the response, cntrylvr. That would probably work if I didn't leave the lights in the autosense mode. i imagine a photocell trips a relay somewhere but I don't have a decent wiring diagram for the car. I suppose I could start using the headlight switch but prefer not too. Amazing how lazy I've become. All three of our cars have automatic headlights. Thanks, again. Charlie

The Saab 9-5 radio harness does not have an illumination wire. The car has daytime running lights. Any suggestions on where to connect the D3 illumination line so that the day-night feature is functional would be appreciated. Thanks.

Guess I got one of the last from Pioneer directly. On Pioneerelectronics.com there is no buy button and on part.pioneerelectronics.com it says: Your Price: $15.00 Status1: Temporarily Out E.T.A. More than 60-days

Crutchfield's site says they don't carry it-"Optional Remote Control: The AVIC-D3 is compatible with the optional CD-R55 remote control (not sold by Crutchfield)." That's why I ordered direct from Pioneer.