Jump to content
AVIC411.com

ryar

Members
 View Profile  See their activity

  • Content Count

    348

  • Joined

  • Last visited

 Content Type 

Everything posted by ryar

  1. ryar
    Password is in password2.rar, I just tried it and it unzipped ok. Use winrar to extract.
  2. ryar
    Hi Har, try avicnet. You can set it up to launch primo when the map button is pressed, or even auto-launch upon starting. You can't rename primo.exe to ezrider.exe or the unit will reboot a few minutes after starting and a "please wait" banner will stay up on the screen. If you do a lot of reading in these forums you will find that others have tried and had the same result.
  3. ryar
    It looks like multiupload is down, I will re-up on mega. Just one small change, with the "map button launches primo" option a long press on menu will take you to hobdrive from the AV screen where as it would not before. Edit: Upload failed after several attempts in mega. Someone want to suggest another upload site? Edit 2: NVM, re-upped on mega. Link in post #2
  4. ryar
    I grabbed some files off my test unit right before it bit the dust and tried them and now it is working. I think it was a corrupt file or something, sorry about that. Anyways, I re-upped on the 2nd page of this thread. If you don't want to copy the whole thing just copy and overwrite everything from the my flash disk/apl2/iGo folder except the content folder onto your unit if you used the 14/04/05 release.
  5. ryar
    I don't know why it is crashing, maybe the settings need to be adjusted rather than deleted or it holds it's last value. Last I checked increasing the values stopped unwanted behavior; playing with this helped me find the lowest possible memory usage on the stock igo. I don't use stock iGo and mapped my buttons so the Map button launches and controls Primo, there is a download in the second post which will allow you to do so. I even deleted the contents in my iGo/GFX folder to save space so sorry I can't check to see what the issue is. Memory settings in the sys.txt is the only thing I pla
  6. ryar
    It won't work on your F920BT, only the following: F500BT, F700BT, F900BT, F90BT, X710BT, and X910BT. If you didn't flash a new wince image from the service menu simply revert to your backup and you should be ok. If you did flash a new wince image find the latest one for your unit and flash that.
  7. ryar
    Since you have to erase your entire my flash disk before starting hybrid 4.0 firmware would be impossible to use (the my flash disk portion anyways), unless it has a fresh wince image in which case you can give it a shot, worst case scenario you would have to flash back using the old wince image. When was it released, do you know? The wince 6.0 upgrade does not update your unit to wince 6.0, it just disables the gyro on f900bt and x910bt so 3rd party programs like primo can "borrow" the gps. I'm not sure who labled it like that but it is misleading. As far as I know wince5.0 is the best we
  8. ryar
    sgtarky - It is pretty trim as it is, the games are only 24 mb or so. Delete them if you choose, there isn't much else to delete that I can think of. You could copy primo onto an sd card and comment out the maps, buildings, dem, poi lines under [folders] in primo's sys.txt (on the sd card), that way the maps will not be on your units limited flash memory. Unfortunatly they will only work for Primo and not the stock iGo, however. Do you really need 50 states' maps? Guess I'm lucky, the Canada map is only 98 mb. The premium dem file is huge though, over 300 mb. gibear2k5 - My pleasure,
  9. ryar
    pvdhelm - There is no icon nor files for Garmin. I took it out a long time ago since it was such a dated program and current maps are hard to find. Check out the italian avicnet, I think it still has garmin included. The link is in the first port of this thread. Try 7ways, it is a much nicer looking program and the maps are easily available. The memory problem with stock iGo is due aggressive memory settings in the stock iGo's sys.txt as follows: [debug] max_memory=29980000 If you comment out or delete the max_memory line you won't get those memory errors anymore. I s
  10. ryar
    I had some time today so I uploaded my My Flash Disk from my unit; it has various changes. It may not be for everyone so make sure you do a full backup in case it doesn't work for you. See the first post of this thread for info. I didn't test the upload since it was pulled from my unit; hopefully I didn't beak anything when I de-personalized and updated the programs. Feel free to post with any issues, questions or general comments.
  11. ryar
    The download is available at uppit via Multiupload, I am downloading now. A torrent is a good idea but just wouldn't get seeded enough. Re-upping anyways.
  12. ryar
    According to this post: http://avic411.com/index.php?/topic/37403-f9310bt-f930bt-how-to-get-into-testmodeservicemode/ it is the VW version of an f930bt, so it probably won't work.
  13. ryar
    6a) Copy maps,pois, dem files, ect from your backup of "My Flash Disk" to your unit. They are located in my flash disk/apl2/igo/content. Primo will share the stock iGo's maps. You can use Tomtom or Navteq maps. GPS underground is a good place to find them.
  14. ryar
    I'll try to answer, Many of the menus are located in files with the text typed out in English. When you change to french they will stay the same, you will have to go through, translate and change the text to what you wish. Where is the "one button" (configure) in russian? I'm not sure what you mean. I don't have TMC in my country so unfortunately I can't help much. Read through the thread as others have posted TMC issues and how they resolved them. I'm not quite sure what you are asking on how to start direct on Primo (2), can you clarify? Do you want it to autostart?
  15. ryar
    YES IT DOES! IF COPYING AND PASTING DOESNT WORK THEN WRITE IT OUT! Edit: Re-upped, most links were dead. REMOVED OBSOLETE PASSWORD FILES FROM OLD RELEASES TO HELP CLEAR UP ANY CONFUSION.
  16. ryar
    To get TMC and BT to work you have to make a few changes. Look back a few pages in this thread at post 517; matyana discovered a solution and posted it for us. The unit will reboot twice upon initialization due to the following: after a hard reset, the first time you are booting after being in testmode, and also if the power is cut off while it is in a certain stage of booting. It shouldn't happen every time, if it is some users have found that their vehicle voltage drops too low upon starting the car.
  17. ryar
    Hi Scoupevo, To run off usb or sd copy the Primo3 folder to the root of the sd/usb. In the sd or usb's sys.txt (in the primo3 folder you copied), under [folders] comment out or delete maps, buildings, dem, and poi. You can then put all your maps in the content folder in the Primo3 folder on the sd/usb. When you launch Primo it will first check your USB and SD before the flash disk, so you don't need to delete the Primo3 on My Flash Disk. If you decide you want to delete Primo from My Flash Disk, make sure you leave the primo3/run folder intact as it contains the files required to launc
  18. ryar
    It will only work on the following: f500bt, f700bt, f900bt, f90bt, x710bt and x910bt.
  19. ryar
    Please upload the files. How do you find 7ways and navigon 7.4.3? I tried to run Sygic 12.1.0 but AVIC's old winCE doesn't meet the prerequisites. Too bad, Sygic runs so smooth on Android. My favorite is still Primo, even on Android. I just wish they had live traffic and whatnot where I live. Anyways, thanks in advance for sharing.
  20. ryar
    EnoHand, go to the hobdrive website and in the forums there are very good instructions on how to load teh correct drivers. I don't recall what I did for the com port, I believe you can modify the reg. to set it up. By default it takes the lowest numbered available port, if I remember correctly. Port splitter is only for the gps port so multiple programs can access the gps simultaneously. How are you editing the base OS? I never played with that, but it would sure make things better with the base OS modded. Please share with us any progress you make; our avic f series are now dinosaurs
  21. ryar
    Make sure you updated the firmware image, follow the instructions in theis thread: http://avic411.com/index.php?/topic/27807-fx31-complete-firmware-image/page-1 Read the instructions and follow the steps in the first post. I never seen a unit not turn on, at the very least it should take you to the pioneer screen. If it won't turn on it is a hardware issue. Maybe you should check your 12 V power and ground wires? Did you do anything besides what was instructed in the service menu?
  22. ryar
    You need to write some sort of script to load the drivers and restart your unit before launching hobdrive. When avicnet initializes and reboots upon startup it is making many changes to winCE, one of which is copying drivers for an obdii to usb reader to your windows folder which were previously absent. Look at the hobdrive website forums and there are some instructions on how to proceed.
  23. ryar
    Thanks, but all I did was stumble across avicnet and manage to get it working on my unit. All credit goes to the pioneers on this site which have long moved on and the talented Russians who got together and created avicnet. Funny, I never had any interest in connecting my avic to the internet but I like the interface and ease of running 3rd party apps in avicnet.
  24. ryar
    What did you have in mind? I guess my goal was to get Primo working with full functuality and an obdii reader program. Both have been accomplished, I got the primo.exe with working sound from a Russian site and managed to figure out the drivers for a usb elm327 module and stumbled upon hobdrive. Other than finding mre 3rd party winCE programs I'm not sure what else we can do. With powerful android tablets priced fairly low, Torque and Primo for Android both out-perform hobdrive and Primo for winCE. I guess i can see why everyone has moved on.
  25. ryar
    Me too, Oilers suck
×
×
  • Create New...