Sabre3487

Try looking at how you hooked up the bluetooth. Make sure you have the correct wires going to the right inputs and the correct outputs going to your devices.

I was searching for the new updates and accidentally clicked on the UK pioneer site and according to their site it is a map upgrade as well as updates. Not sure if it will be the same for the us.. Link: http://www.pioneer.be/eur/products/25/38/301/CNDV-80MT/index.html

The only thing that it won't do as far as I know: Is you can not transfer the phonebook to the D3. It could if the D3 got a firmware update that grabbed the phone book from the iphone. And I have not tried voice yet! It auto connects no problem, takes over a call if I am on phone and get in and turn car on. etc

Just curious but how did you get yours to autoconnect? I have to pair iphone 3g each time the radio/car is turned on. I had the same probelm until I deleted other phones I had saved in my D3. I then deleted the pairing on the iphone, and re paired and ever since then It connects every time, and also unconnects when I turn the car off, the call is still going on phone. As well as if I get in my car on the phone it transfers to the cars speakers once turned on!

Just curious but how did you get yours to autoconnect? I have to pair iphone 3g each time the radio/car is turned on. I had the same probelm until I deleted other phones I had saved in my D3. I then deleted the pairing on the iphone, and re paired and ever since then It connects every time, and also unconnects when I turn the car off, the call is still going on phone. As well as if I get in my car on the phone it transfers to the cars speakers once turned on!

Is there an upgrade disc available for the D3 yet? I have seen the other upgrade disc that just came out however the D3 model is not listed?? Anyone know?

I have a Zephyr. The vss is sent via the Medium speed can bus [16 pin harness] to stock radio along with illumination etc.. Underneath the drivers side there is the smart junction box. you can get the reverse gear pin there green/white, rear park lamps also for illumination (grey/yellow). You can buy if you choose from soundgate audio CAN vss interface that you connect to the OBDII conector. I have the wire printout, send me a PM and I will give you info. Burn

V3xx && D807: Service Provider: Cingular (AT&T Wireless) Phone-SW Version: Motorola RAZR V3xx && Samsung D807 Autoconnect: Yes / Yes Basic Function: ALL Phone Book Transfer: Yes / Yes both one at a time. Voice Calling: Yes / Yes Signal & Battery Strength Indicator: Yes V3xx / Did not look at time BT Audio Capable?: Not tested Also Samsung Sync A707 Auto connect basic funtsion, no phonebook transfer. Burn

I have had my D3 for almost a month! At first I had no vss, just gps and it was fairly good, then add vss and reset the learning mode. When I first tried to get home, it did not tell me to take the shortcut I normally use. However after a couple of times of me using my shortcut anyways, it now tells me to take this shortcut. I did not think the D3 had "navigation learning" like the Z1 one, however this is the second address that I have taking a shortcut path a few times that it now remembers and tells me to take the route I want. I have never had the unit tell me to go buy a road th

-------------------------------------------------------------------------------- "The CD-BTB200 is the same hardware as the CD-BTB100, so there will not be any change to phone compatibility. What has changed is the mic gain is lowered, to reduce echo, and the auto-connect feature will work with Motorola phones. That's it. " Actually Pioneer tech representative says that there is a whole different chipset and firmware in this version, which is a hardware and sotware change.

I have a 2006 Zephyr and Avic D3. The illumination wire is on the CAN bus. So does anyone know what color and pin wire to use for a 12v switched line when the lights are turned on? Also does The avic d3 have a illum+ and illum- or just one? Thanks, Burn

Crutchfield has this up on the website now!! Last time that happened I got my D3 two days later. Sweet!! http://www.crutchfield.com/S-hdUB6H0FqQ8/cgi-bin/ProdView.asp?search=130btb200&i=130BTB200 Burn

Anyone know if the bluetooth btb200 is coming out soon? I know there was some posts in the past about this?

I have read the post above about XM/Sirrus I want to know abou which ones has better D3 interface? Or which one sounds better, still keeps the bass ?

I get static on a FOX fm channel after the install, would power antenna wire cause? I have an in glass antenna? I do have my pin 5 pwr antenna wire connected? Only select FM channels have some static. Anyone have any opinions XM vs Sirrus, just going to use it for music. Not too concerned with Stern so what else seperates them? Burn