Alexei Navalny

If it works now, it will work with 5.1. That was a patch to 5.0 to fix some issues with Apple Lighting support. BTW, it is still on Pioneer USA's site: Software Downloads Scroll down to X940 5.1 update. Read the instructions before installing.

Keepin mind that you don't currently have a x-940, you have a X920 running v5.0 firmware. In the 5.1 update it clearly says:

Got it. Pioneer_2017_maps-Z110-CRD5009A.pdf

I wouldn't bother trying to install 2.003. It is obselete and if you've lived with it this long - you don't need it. Instead, update to the 2017 firmware and maps.

On my Z110-BT it is in /USER/SETUP/BT. Here's mine but I don't know if it will work. Did you try just copy/deleting yours and see it it could be recreated? BTUNIT.DAT

First make sure that your parking brake is detected as set. Go to Settings / Navi Settings / Connection Status and make sure it says Parking Brake is On. When Off, some settings and functions are grayed.

I think there might be a few minor differences in the menus. Did you also update the Bluetooth to v3.32? I can't help with speed cameras. I think somewhere in this thread someone posted about that. We don't have that "feature" in the US. I assume your iPod is wired and your Samsung is through BT. If you are trying to use Pandora or Aha, there is a setting somewhere called App Connection" where you select wired or wireless (BT). iPods should be wired (USB) with the proper cable. Some people have reported problems with Samsung via BT. But whenever there are problems after a ma

Depending on your previous version, you might not notice any changes unless a map in your area changed. Go to settings / System Settings / Service Information Verify it says v7.0.

I don't know why some people have trouble getting that file. I can download it. I even reposted it here: http://avic411.com/index.php?/topic/83535-map-update-hack-using-shortfuse-method-z110-z140x920-x940/&do=findComment&comment=347222

Shortfuse Hack

So Testmode booted and you saw the menu? That's really all I wanted to know for now. That says your unit isn't totally bricked. There's some Youtube videos on TestMode but the operation is different between the X and Z series (different buttons). You probably won't need it anyway. If your unit already has 3.x on it, it won't do anything. So I'd try installing the 2017 maps/app. It is in the Z series sub-forum. First read and Install the shortfuse hack. That prepares the unit for the map installation. BTW - Z and X series use the same update. Good luck - you've got a lot of reading to do.

If that is the only thing wrong, it sounds like a settings issue. I just looked in the X series operations manual and it mentions you can turn off guidance by pressing the center of the volume knob. A long press mutes everything. A short press mutes guidance. Also check System Settings/Volume Settings to see both the Guidance volume level and the guidance mute icon.

What update and what happened when you tried to install it? Did it do nothing? Have you tried TestMode? BTW, I see no point in installing v3.x software. If it happened out-of-the-blue then It sounds like a hardware problem.

I am certain that the error is when the script is executing the command: COPY USER\SYSTEM\SECURITY\PASSWORD.DAT SD\PASSWORD.DAT That means it can't write to SD. There is the only one COPY command in the script. If you want, you can edit ScriptExec.ini and remove that line. In that case, you will not have a backup of the old password file, but that should not hurt.

It can't write to the SD. Is the write-protect on?

Great. Which model? I guess it shouldn't matter as long as it is compatible with v7 (2017) firmware. But it is nice to know the proven successes.

It is easily reversible if it doesn't work.

Or you could of searched around here for a few minutes and got it for free. Security Password Removal Script for Z110/120/130/140, x920/930/940 & some older F series

What version map software are you running? You don't want the original (Z140) BT firmware. If you can't install the update you won't be able to re-install the original. Best to figure out the problem. You need to run the version that goes with your current applications. You never said exactly what the problem was installing the update. What happens if you try again? Try a different SD? Reformat (full not quick) FAT32. Don't use a huge sd - less than 16 GB. BTW, all you need on the SD is the FIRMWARE folder & contents. If you don't have the parking brake by-passed, set your parking brake,

Yeah, that sucks. I guess going forward we'll have to use links to referenced posts. I think this is what #151 refers to http://avic411.com/index.php?/topic/32929-x930bt-password-recovery-obsolete/&do=findComment&comment=280379

Thanks. I thought about doing something like that but I didn't want to deal with figuring out (in the script) which PRG directory to update. Now, I realize it doesn't matter - just do both. The non-active directory NAVI.EXE will never be run again. And next update (2018?) will overwrite it anyway. Brilliant. BTW, I added a warning so some fool doesn't brick his unit with an incompatible program.

First install shortfuse (read the 1st post in that thread). Then you can reformat and use the SD for installing the maps. Do not try to do both at the same time. Do not have any files on the map SD except the files extracted for the 2017 zip. Do not modify any of those files except if you need to replace CARDINFO,CIF. If you don't know what I'm referring to, read the thread.

If you are using the files provided by godzilla, yes. you must install the shortfuse hack. Then enter PASSWORDPASSWORD when asked for the Pioneer code.

I don't know what the problem is. I just downloaded the file and unzipped it with no errors. The files NDATA.001 and NDATA.002 are there. You seem to be the only person to be having this problem.

There is nothing wrong with the zip file posted by godzilla. So the files you posted are not necessary. I suspect you used an incorrect password when you unzipped the files.