Jump to content
AVIC411.com

capnvivi

Members
  • Content Count

    2
  • Joined

  • Last visited

About capnvivi

  • Rank

  1. It turns out my battery's time had come, someone ran a diagnostic on my set up and there are no power drains anywhere, so that's a load off my mind. I noticed a blue/white wire that appeared to be for the Amplifier. I assumed it was only for aftermarket Amps so I didn't connect it. I just went out and connected it to the blue/white wire in the wire harness but it did not appear to work. I still get no AM reception to speak of and shoddy FM reception. I do also have a black wire in the harness that's not connected to anything. I assumed I had to plug the blue wire into something consid
  2. I'm not sure if the Avic could be to blame for this or if it could be my faulty wiring. I installed it myself in my 2005 Nissan Altima using the wiring Harness. I did not connect the mute button or the Power Amp/Auto Antenna Relay and just taped them off. I bound the other wires using zip ties to ensure the whole process was clean, and I installed it pretty easily. I put the Nav antenna under the dash behind the unit itself but I did not install the mic. I spliced the ground with the ground wire on my wiring harness, but I took the handbrake wire and grounded it (bypass) instead of h
×
×
  • Create New...