lseguy1

go into audio settings and ensure AV1 is set to "ipod"

Finally had to just re-install the entire 3.0 from one of the threads in this forum. then I was able to get to the main menus, and turn the backup camera setting to "off". This was just poor coding from the beginning. First...the code should NEVER allow you to get permanently stuck on ANY screen without being able to get past it. Second...the update should have never just turned "on" the backup camera function on its own. Anyways..problem solved.

Thanks...but how do I now get to the settings to review them...if I cant get past the black camera warning screen in any fashion?

So the update finally was fully successful, with all successful messages. Now first drive after update...and it boots fine to splash screen, then a black screen with "warning: Images may be reversed". I can control the media/audio from the steering wheel controls, but nothing happens when I touch the screen or press the buttons on the unit. *sigh* Im permanently stuck on this black screen at all times. Any suggestions? I've never used a backup camera on this unit, and the only mod is the hardwire bypass.

got to the 98% mark and "upgrade has failed pressed to retry" message. Got it 5 times. I just kept attempting the retry...on the 6th time, it went through successfully

does this hack include the updated maps, like the $60 version does?

Agreed. I had a pyle video amp a few years back, and it didnt help. It had a gain adjustment, but it's max gain setting was basically the standard signal strength. In other words, it basically only worked as a video signal reducer. Switched out to a more expensive Alpine video signal amplifier...and all was perfect.

Yep!

And you think the Pioneer rep specifically came to you because you whined here to have Jason magically snap his finger to have them come to your aid? Because you have single-handedly identified a HUGE ONGOING problem that all units are defective? I don't think so.. the issue is not as wide-spread as you seem to think, just because you're affected does not make it THE MOST IMPORTANT PROBLEM IN THE WORLD! The Pioneer rep was there because this site is a valuable resource, and it's thanks to many people who have put in a great deal of hard work, Jason especially, that made it so. N

Lol. 18 threads detailing either issues with Ipods not being recognized and/or sound failing from one side. Yeah, thats widespread. And for your knowledge, I did receive a PM from a Pioneer Rep who saw this thread and informed me that Pioneer is aware of the issue, and they have been researching in the lab but need more info, and asked me for specifics surrounding my install, and the circumstances when the problem occurs, and what specific IPOD and cable that I am using, including firmware #. He instructed me to plug in a music filled USB thumb drive in the USB slot to determine if the issue

bump for Jason

Hi. Seems like you have some connects with Pioneer? Not sure if you've noticed, but there appears to be a fairly widespread significant issue with Ipods and Avic F series. It is VERY annoying...almost makes the Avic F not worth owning. Seriously. It is THAT bad for those of us who use the IPOD as their primary music source. Pls check these threads for more details, and let us know if Pioneer is aware, and what their OFFICIAL position is. Thanks viewtopic.php?f=33&t=23993&start=15 viewtopic.php?f=33&t=24911 viewtopic.php?f=33&t=25013 viewtopic.php?f=33&a

Yes. That everythingq link above is AMAZING. That fixed all of my q to avic issues

viewtopic.php?f=33&t=21461&start=15

Could you elaborate a bit? Mine is still exhibiting the symptoms and usually has the issue very smoothly. Fades out from left to right and may decide to fade back in right to left. Right channel always fine. Left channel may be fine, then may slowly fade completely out. Never in any abrubt manner or over bumps. not exhbiting any sort of loose connection type issue at all. Seems like its software related?