gambera

I applied the update and it works fine, however, when I open navi.exe in hex editor I don't see offset BEBFC. There is only BEEBF0. I'm on 5.0 and don't want to update Z140BH patch. Of course I'm trying to get rid of the nag screen, which I was able to do during the last CNSD-310FM/UC upgrade. I have Z130BT. Any help is appreciated.

I know this is off topic, but check this LINK. This thread was made for averyone's benefit, but someone took it too far. Again, this thread is awesome

I forgot about it, but this was mentioned few times in this thread. At least you figured it out on ur own.

Format you SD card to FAT32, download the file in my post, unzip it in your PC, then copy and past the content to your SD card.You will not disable your nav unit, Now go to this thread and follow post #55 and 56, even tho your unit is not 930bt, steps are the same. After you're done, eject sd card and then reboot HU. Hackmode+Supertestmode.rar

Update: The supertestmode.zip has the correct file in it, so it does work. I finally created PRG.FLG file and put it in the sd card, then in Testmode I pasted it to USER\ in the unit. I didn't work for me because for some reason I've created PRG.FLG FOLDER, not file, and pasted it to the unit...I'm a dummass LOL. I've rearned the hard way tho. And just for future reference, if you need to creat new file in your Windows machine, open command prompt and type: cd.>filename where filename could be PRG.FLG....ha ha Everything is up and running again with the latest update that I prev

I already have supertestmode.zip, but when unziped, there's only TESTMODE.KEY, is that the file? I've been able to get to the avic's testmode, but that's about it. As soon as I remove the sd card and reboot, the unit goes to that same message "there is no applicable program" I've created empty PRG.FLG file and pasted it to USER directory and after reboot I still get the same message. Did I corrupt any of the files on the unit by any chance? Since I don't have any backup, how do I recover any needed files? Thanks

Ok guys, now I need real help because I bricked my z130bt I just upgraded my z130 with the maps (CNSD-310FM/UC) and it was easy, so I have fw ver.4.000 and App ver. 4.010. I did NOT do backup on my original User files. Today I tried to run Condi's hackmode v.2.21 so I can go to Testmode and do the Warning and Nag mode later, but I soon as I boot the avic from USB I get "There is no applicable program" and that's it. I tried upgrading to the new maps with micro sd card with no luck. Then I used Condi's hackmode v.2.1 and I get stuck on a boot loop. I never got to Testmode tho a

Z130BT here ver. 3.001 Followed the steps on post #1 and everything was flowless, not even password. Used 16GB micro sdHC class 2 card, formatted on FAT32. It took 25min to update to z140 and 7min to do the bluetooth. Thanks everyone who made this so easy