Jump to content
AVIC411.com

Airmcnair

Members
  • Content Count

    9
  • Joined

  • Last visited

Everything posted by Airmcnair

  1. Well I wish I could say it wasn't there but it is..... That's a good start! I thought I read somewhere that it was Cardinfo file that was the one which did the card reading. I wish I knew. I followed the directions given to the T. I can get it to read and accept the RenewalIFLib-Auto-Replacer file but when I go to put in the 2012 Upgrade file it does nothing. Its got to be something easy or this thing would not be working at all. Thank you for giving me a hand. Hopefully this will get resolved soon! Cheers!
  2. OK, I was not doing it right....... Sorry. So now the issue is that because my unit will not go to a usable screen and defaults to Program Startup Error, the only way for me to get into anything usable is to manually put it into test mode. It will not auto load from the SD card upon startup of the unit. Does this make sense? Suggestions? Thank you for your help!
  3. I cant seem to figure out this torrent....... The only file I get is for some stupid video program. Its 6528kb. Not the 7 files that are over 2GB as expected. This is exactly the type of mess I have been dealing with since I started this process months ago....... Can anybody help me out please?
  4. Is there not a way to do a complete rewrite of all folders? I think there are files/folders that have been deleted on accident during this process of recovering my unit.......
  5. Thank you for responding! The unit is out of the vehicle and set up on my test bench. Power has been off for far more than 30min. Its defiantly not a power thing that's going to fix this unit...... The unit was in my truck when I received the SD card from Pioneer with the update on it. I followed the instructions on the sheet provided by them with the update and did so exactly as they tell you to. Shortly after I installed the SD card from Pioneer into my unit, it became bricked. I had white and black lines running horizontally across the screen. I then cycled power just to have it end up
  6. Hello all once again! I am still working on my X920BT that was bricked during a firmware update sent to me by Pioneer. Since then I have managed to get it to respond to a number of attempts, bricked it numerous times and recovered it to a point where I can reliably get it into test mode without it shutting down on its own in the middle of making changes. I can also get it to recognize programs such as Condi's Hack Mode, Super Test Mode and that's about it. During startup it will go to splash screen and then go black with the words Program Startup Error. It will allow me to put it in te
  7. You may ask the guys in Hack/Mods section. I imagine they are going to tell you to put one of the firmware files they have on the unit. I am kindof in the same boat. My unit only partially works.......
  8. Man I went through this yesterday on mine. To at least recover it to a workable position I had to do the following. Upon startup hold down the Mode button and push track forward/back, forward/back, forward/back, forward/back. That should get you into the service menu. You can then go through there and look at logged errors. Once complete, go ahead and erase the errors. When done power down and restart after a short down period. That should at least get you rebooting to a good starting place. Cheers, Chris
  9. Hi all! I have been lurking around these forums for the last few months. Not until yesterday did I make an account so I could get some help...... After reading everything I can regarding the X920BT I am finding myself confused. I do not want to brick my unit again and I do not have my unit backed up as of yet. Below is a quick overview of what happen along with some of the issues I am having as well as questions on things I am confused on. Any help would be greatly appreciated. I will start with how this happen. About 6 months ago I went to Pioneer's website and ordered a firmware upda
×
×
  • Create New...