bulletooth Posted February 16, 2008 Report Share Posted February 16, 2008 Hey guys, I finished installing my D3 with no problems at all. EXCEPT ONE. The bypass that I got from AVCI411 is not working for me and I'm 100% positive I did it correctly The steps I took were as follows: 1. Remove yellow mute wire from harness and place it one spot directly above. 2. Ground both Parking Brake Wire and MUTE wire. But unfortunately its still not working. I heard something about installing a TOGGLE SWITCH but I couldnt find anything on this site through the SEARCH. Anybody know about this toggle switch, if so, can you let me know where to connect it?... THANK YOU Link to post Share on other sites
whtcrxghst Posted February 16, 2008 Report Share Posted February 16, 2008 You don't need a toggle switch, you just did something wrong. Double check your grounds are solid, double check that the wire you moved is firmly seated in the hole and making good contact with the pin, etc. There are literally thousands of these done exactly the way described, and they all work fine Link to post Share on other sites
MisFit Posted February 16, 2008 Report Share Posted February 16, 2008 make sure you didnt break the pin of the mute wire when you moved it Link to post Share on other sites
dmhines Posted February 17, 2008 Report Share Posted February 17, 2008 I installed my D3 last night ... ByPass instructions worked perfectly. Link to post Share on other sites
paidtomuch Posted March 17, 2008 Report Share Posted March 17, 2008 You said you switched and grounded your yellow wire, all that I have read indicates you should have done this to a yellow / black wire. Was this a typo or did you do the wrong wire? Link to post Share on other sites
Sprawl Posted March 17, 2008 Report Share Posted March 17, 2008 its really not that hard people Move pin connect to black wire Connect green wire to blac wire Connect black wire to metal and voila Link to post Share on other sites
brunp Posted March 18, 2008 Report Share Posted March 18, 2008 I have not found a need to bypass yet. However, if I end up moving my iPOD location and I am already back there, I may as well do it. I am now just starting to play with the custom backgrounds. I matched my button colors quite easily. Bluetooth is workin' like a charm. Link to post Share on other sites
Recommended Posts