binderim Posted April 26, 2006 Report Share Posted April 26, 2006 I just created one and I need to put it on my N3. Any one know how to do that? Quote Link to post Share on other sites
JasonH Posted April 26, 2006 Report Share Posted April 26, 2006 That looks Cool! You will have a make a ISO of the stock Nav DVD. Once the iso is made, open it using ultra ISO or equivilant. Replace one of the stock gauges with your custom guage then save the iso, and burn it. Quote Link to post Share on other sites
binderim Posted April 27, 2006 Author Report Share Posted April 27, 2006 Had to chang some stuff but here is a photo of it in the n3. One problem if you look at the gage on the left you can see that when you get ride of the time gage it shows part of the old gage. Any ideas? Quote Link to post Share on other sites
JasonH Posted April 27, 2006 Report Share Posted April 27, 2006 Hmm, I don't know. Maybe try some different colors. I know with the D1 a lot of colors show up transparent or inverted. Quote Link to post Share on other sites
binderim Posted April 27, 2006 Author Report Share Posted April 27, 2006 No thats not the case. it is showing the bottom peace from the one that i replaced. i need to find out where it is. Quote Link to post Share on other sites
Guest guest Posted July 13, 2006 Report Share Posted July 13, 2006 perhaps your resolution is different than the original file... try opening the original guage art, and make sure you are using the exact same resolution and aspect ratio Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.