Kristifer Posted May 2, 2008 Report Share Posted May 2, 2008 Anybody know where I can find the speed sensor wire and reverse wire at the dash for a 2005 F350? Thank you in advance!! Quote Link to post Share on other sites
dbabnew Posted May 2, 2008 Report Share Posted May 2, 2008 I just installed D3 in 2007 Ford F250. If they have the same wiring. the speed sensor wire is the grey with black stripe wire in your factory radio harness. the reverse wire you can find coming off the steering column. behind the lower dash panel (where fuse box is) the wire is light blue with a black stripe. going into an 8 pin block. Like I said that is how it was on my F250. Hope it helps Quote Link to post Share on other sites
Julius Posted May 2, 2008 Report Share Posted May 2, 2008 Speed Sense gray/black radio harness or ABS module, pin 21 Reverse Light black/pink + back of fuse box, black 8 pin plug Quote Link to post Share on other sites
Kristifer Posted May 2, 2008 Author Report Share Posted May 2, 2008 Thank you very much guys!! Quote Link to post Share on other sites
Julius Posted May 2, 2008 Report Share Posted May 2, 2008 Go to the rear brakelight look under the truck and try to verify the correct color of your brakelight.Then look for it where we told you where it was at the fuse box. Quote Link to post Share on other sites
Kristifer Posted May 14, 2008 Author Report Share Posted May 14, 2008 Still can not find reverse wire. Quote Link to post Share on other sites
Julius Posted May 14, 2008 Report Share Posted May 14, 2008 Tap it at the rear brake light.Its a longer run but you can be certain of knowing the brake light wire. Quote Link to post Share on other sites
Julius Posted May 14, 2008 Report Share Posted May 14, 2008 Tap it at the rear brake light.Its a longer run but you can be certain of knowing the brake light wire. Quote Link to post Share on other sites
Julius Posted May 14, 2008 Report Share Posted May 14, 2008 Tap it at the rear brake light.Its a longer run but you can be certain of knowing the brake light wire. Quote Link to post Share on other sites
Kristifer Posted May 14, 2008 Author Report Share Posted May 14, 2008 Got it. Just didn't look hard enough. It was the light black that I was not paying attention to. Quote Link to post Share on other sites
Julius Posted May 14, 2008 Report Share Posted May 14, 2008 Sorry about the multiple replies,I'm having connection problems. Quote Link to post Share on other sites
Julius Posted May 14, 2008 Report Share Posted May 14, 2008 So everything is up and running now? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.