Blustang05 Posted September 7, 2008 Report Share Posted September 7, 2008 Hello I have a 2005 Mustang. I recently installed a set of alpine SPX components in the doors and i replace the stock 8's with a set of CDT EF8s 4ohm SVC I think the alpines can handle 60watts at 4Ohms and the CDTs can handle 200 Watts I was looking at a Kicker ZX550.3 to run every thing. RMS Power in Watts @14.4V, 4Ω Stereo ≤1% THD+N 70 x 2 @14.4V, 2Ω Stereo, ≤1% THD+N 85 x 2 @14.4V, 4Ω Mono, ≤1% THD+N N/A RMS Power in Watts, Subwoofer channel driven @14.4V, 4Ω Mono ≤1.5% THD+N 210 x 1 @14.4V, 2Ω Mono, ≤1.5% THD+N 420 x 1 Can i run the alpines on the 4ohm channels (70x2) and the CDT's in parallel give me 2Ohms and put on the 420x1 sub channel. I guess is what i am asking if the one set of channels are wired 4ohm dose that mean the sub channel needs to also be wired in 4ohm? Quote Link to post Share on other sites
LostRacer Posted September 9, 2008 Report Share Posted September 9, 2008 You do not need to run them all the same. It sounds like the 3rd channel is its own seperate circuitry. The way your asking about setting it up sounds fine. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.