Jump to content
AVIC411.com

kicker ZX550.3 amp question


Recommended Posts

Hello I have a 2005 Mustang. I recently installed a set of alpine SPX components in the doors and i replace the stock 8's with a set of CDT EF8s 4ohm SVC

 

 

I think the alpines can handle 60watts at 4Ohms and the CDTs can handle 200 Watts

 

 

I was looking at a Kicker ZX550.3 to run every thing.

 

RMS Power in Watts

@14.4V, 4Ω Stereo ≤1% THD+N 70 x 2

@14.4V, 2Ω Stereo, ≤1% THD+N 85 x 2

@14.4V, 4Ω Mono, ≤1% THD+N N/A

RMS Power in Watts, Subwoofer channel driven

@14.4V, 4Ω Mono ≤1.5% THD+N 210 x 1

@14.4V, 2Ω Mono, ≤1.5% THD+N 420 x 1

 

Can i run the alpines on the 4ohm channels (70x2) and the CDT's in parallel give me 2Ohms and put on the 420x1 sub channel.

 

 

I guess is what i am asking if the one set of channels are wired 4ohm dose that mean the sub channel needs to also be wired in 4ohm?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...