DiscoLad Posted October 5, 2008 Report Share Posted October 5, 2008 HI guys! I was installing my Z3 today, and everything went pretty well. Unfortunately in the process I managed to accidentally cut through my cars antenna cable. Am I able to simply splice it back together, as you would a normal wire, or is there something special about them? Any thoughts on how to fix this? Many thanks! Quote Link to post Share on other sites
jimmy 2 times Posted March 3, 2009 Report Share Posted March 3, 2009 i would get a new motorla end, and put the end on where you cut it. Then run an antenna extension from the cut to the deck. You will probably get too much static trying to fix it where it was cut Quote Link to post Share on other sites
inches805 Posted March 15, 2009 Report Share Posted March 15, 2009 I have spliced antennas together (you are talking about the am/fm right) Your best bet would be put new ends on like jimmy wrote. However, you could solder or connect the wires back together and it will work, though the AM will not be as good. Basically, if you don't use AM just splice it back together. If you do use AM put new ends on. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.