Jump to content
AVIC411.com

How do you calibrate the screen?


Recommended Posts

Don't you have the manual? Anyway, use a stylus to do this (my installer tossed it so I used my PDA stylus, all the same):

 

1 Press the V button.

The Picture Adjust screen appears.

2 Press and hold the V button for two seconds

or more.

The 4-point touch panel adjustment screen

appears.

3 Touch and hold each of the arrows on the

four corners of the screen with the touch

panel adjustment pen.

Hold the pen on the arrow until each one of

the four arrows turns red.

4 Press the V button.

The adjusted position data is saved.

❒ Do not turn off the engine while saving the

adjusted position data.

❒ Press the MAP button to complete the 4-

point adjustment.

5 Press the V button.

The 16-point touch panel adjustment screen

appears.

6 Gently touch the center of the + mark displayed

on the screen with the touch panel

adjustment pen.

After you touch all marks, the adjusted position

data is saved.

❒ Do not turn off the engine while saving the

adjusted position data.

❒ Press the V button to return to the previous

adjustment position.

❒ To cancel the adjustment, press the MAP

button.

7 Press the MAP button.

The adjustment is complete.

❒ If touch panel adjustment cannot be performed

properly, consult your local Pioneer

dealer.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...