drober30 Posted November 6, 2008 Report Share Posted November 6, 2008 Is there a way to calibrate the screen on a Z1? Every time I touch a button on thee screen, the button next to it is what activates. Quote Link to post Share on other sites
freerider Posted November 7, 2008 Report Share Posted November 7, 2008 Don't you have the manual? Anyway, use a stylus to do this (my installer tossed it so I used my PDA stylus, all the same): 1 Press the V button. The Picture Adjust screen appears. 2 Press and hold the V button for two seconds or more. The 4-point touch panel adjustment screen appears. 3 Touch and hold each of the arrows on the four corners of the screen with the touch panel adjustment pen. Hold the pen on the arrow until each one of the four arrows turns red. 4 Press the V button. The adjusted position data is saved. ❒ Do not turn off the engine while saving the adjusted position data. ❒ Press the MAP button to complete the 4- point adjustment. 5 Press the V button. The 16-point touch panel adjustment screen appears. 6 Gently touch the center of the + mark displayed on the screen with the touch panel adjustment pen. After you touch all marks, the adjusted position data is saved. ❒ Do not turn off the engine while saving the adjusted position data. ❒ Press the V button to return to the previous adjustment position. ❒ To cancel the adjustment, press the MAP button. 7 Press the MAP button. The adjustment is complete. ❒ If touch panel adjustment cannot be performed properly, consult your local Pioneer dealer. Quote Link to post Share on other sites
drober30 Posted November 9, 2008 Author Report Share Posted November 9, 2008 Thanks for the info! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.