ASMITH1123 Posted November 15, 2008 Report Share Posted November 15, 2008 I have a customer with a rv with currently 3 cameras a rev. a left and a right, all of which activate through their repective signal..... however the customer wants to ugrade to the f90 and i am stuck trying to figure out a switching system to incorp. his cameras which still work, however his montior doesnt ..... any help will be greatly appreciated Quote Link to post Share on other sites
thextreme1 Posted November 15, 2008 Report Share Posted November 15, 2008 Edit all... THIS IS WHAT YOU WANT and IT runs off of 12volts!!! http://www.rvcams.com/merchant2/merchant.mvc?Screen=PROD&Store_Code=RBCARVS&Product_Code=CSW5000Q&Category_Code= Quote Link to post Share on other sites
wasntme Posted November 15, 2008 Report Share Posted November 15, 2008 That will work but it is not necessary. Use a a three position dial or toggle switch, RCA Y connectors, and three relays. Join all three cameras into a single input on the head unit. Then wire the switch to the relays so that each camera only has power when it is selected on the switch. I have done this on at least a dozen times and it works perfectly. Quote Link to post Share on other sites
dericn Posted December 16, 2008 Report Share Posted December 16, 2008 A little late with my reply, but I just stumbled across this item: http://www.vidswitch.com/ This will let you use the F90s rearview camera input with his existing cameras. A bit pricey, but RV owners tend to have deep pockets... -Eric Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.