attilas Posted September 19, 2006 Report Share Posted September 19, 2006 Perhaps this has been asked, but i couldn't find it with a search. When you power off the Z1 the XM radio always goes back to channel 001. Is there a way to have it turn back on to the last channel I was listening to? THanks (please don't flame the newbie) Quote Link to post Share on other sites
bdmpastx Posted September 19, 2006 Report Share Posted September 19, 2006 Try wiring the XM properly. You must have the power switched on the XM Tuner with the ignition. The XM needs 24hr 12v power hence the yellow color of the power wire. Quote Link to post Share on other sites
03Aviator Posted September 19, 2006 Report Share Posted September 19, 2006 Actually, there are two power leads to the XM box. One is constant power and the other is switched. However, if you use the IP BUS cable, you MUST only hook up one of the power leads. For the life of me, I can't remember which one...but I THINK it's the constant power you hook up. The other you just tape up. There was a flyer included in my box instructing you to the updated wiring. It was NOT in the directions. Quote Link to post Share on other sites
cntrylvr79 Posted September 20, 2006 Report Share Posted September 20, 2006 If you're using the ip-bus cable do not hook up the red switched wire. Only the yellow constant power and black ground wires will be hooked up. Quote Link to post Share on other sites
03Aviator Posted September 21, 2006 Report Share Posted September 21, 2006 [quote name="cntrylvr79"]If you're using the ip-bus cable do not hook up the red switched wire. Only the yellow constant power and black ground wires will be hooked up.[/quote] There you go! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.