rlemere Posted February 25, 2009 Report Share Posted February 25, 2009 Hi, I am new here so take it easy on me! I bought a used truck 2007 Ford Expedition with this unit in it. The Navigation CD was no good so I bought a copy of the West disc off of Ebay and it would not work? I think I have a wiring issue as someone has done some crazy stuff with the wiring. Looks like they did the hack but cut the wires to unhack it? What I am looking for is a schematic or illustration on what color wires are suppose to be where on a "stock" harness. From there I think I can do the hack correctly and maybe the disc will work??? Any help is most appreciated! Roger Quote Link to post Share on other sites
rlemere Posted February 25, 2009 Author Report Share Posted February 25, 2009 Second question......I have searched all 14 pages and see that some use the white plug and others the black plug.... Which plug is used (black or white) to do the bypass?? Ihave the AVIC-D1 unit. Thanks in advance! Roger Quote Link to post Share on other sites
rlemere Posted February 26, 2009 Author Report Share Posted February 26, 2009 Can anyone help me here? Quote Link to post Share on other sites
ptricks Posted February 26, 2009 Report Share Posted February 26, 2009 Nothing like a google search to find the info: install manual: http://www.pioneerelectronics.com/pio/p ... Manual.pdf operations manual: http://www.pioneerelectronics.com/pio/p ... Manual.pdf hardware manual: http://www.pioneerelectronics.com/pio/p ... Manual.pdf grab a beer, and have a read! Quote Link to post Share on other sites
rlemere Posted February 26, 2009 Author Report Share Posted February 26, 2009 Thanks for the links, but I have been there already. The manuals do not tell me which wire color is in what location, especially if my plugs have been messed with. If you have information on colored wires and where they belong (from the factory) that would be helpful. Quote Link to post Share on other sites
ptricks Posted February 26, 2009 Report Share Posted February 26, 2009 Ah- I understand. Have you called Pioneer tech support and asked them? Quote Link to post Share on other sites
rlemere Posted February 27, 2009 Author Report Share Posted February 27, 2009 FYI, fiqured it out......Found a picture of the plug on here with where the bypass wire needs to be. It is off the black plug and inserts above the factory black ground wire. Thanks again for your comments. Looking forward to doing the same thing when I upgrade to the F90BT. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.