demetrius316 Posted March 6, 2009 Report Share Posted March 6, 2009 Hi i have a problem with my n2 it tell me the in navgation initialzation is currenty in progress or there maybe a improper connection of the parking break lead.Now the radio i had was a 7500dvd that i took out of my truck to installed the n2.So i used the same plug from the 7500dvd.The n2 already have the solder bypass done to it.To me it look like the unit is not seening the parking break wire.Let me know what u guys think about this isssue that im having and thanks.It load the map disk and restarted the unit so the disk are fine. Quote Link to post Share on other sites
CamelTowing Posted March 6, 2009 Report Share Posted March 6, 2009 Do you have the parking brake wire grounded? Quote Link to post Share on other sites
demetrius316 Posted March 7, 2009 Author Report Share Posted March 7, 2009 yes the parking break is grounded. Quote Link to post Share on other sites
CamelTowing Posted March 8, 2009 Report Share Posted March 8, 2009 Then the bypass wasn't done right Quote Link to post Share on other sites
demetrius316 Posted March 9, 2009 Author Report Share Posted March 9, 2009 Ok i get that redone tmr and let u know Quote Link to post Share on other sites
demetrius316 Posted March 9, 2009 Author Report Share Posted March 9, 2009 ok I looked at da bypass that was done and the solder was thick.So I desolder that and now I only see 2 holes in the borad where the solder was at.Can I take the unit apart and get to it from the other side. Quote Link to post Share on other sites
jimmy303 Posted April 9, 2009 Report Share Posted April 9, 2009 The side you have already seen should have done the trick. The harnesses may not be interchangeable, but I am not 100% sure of this... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.