JasonH Posted October 15, 2005 Report Share Posted October 15, 2005 Allways getting a "XM UPDATING PLEASE WAIT" Box? This error is caused when the data cable is connected to the D1 and you have not subscribed to XM NavTraffic. Software Version 1.2 fixes this problem, and is avaiable from pioneer after registering your unit. Quote Link to post Share on other sites
-1- Posted October 23, 2005 Report Share Posted October 23, 2005 I've had my AVIC-D1 for about six weeks. I had the same problem with the "XM updating, please wait" message. Like Jason stated, there's a new Version 1.2 software available for the AVIC-D1. To get the software, you must register your AVIC-D1 through the Pioneer web site. Pioneer states they won't support their radios purchased off the internet from an "unauthorized" Pioneer dealer. I purchased mine off the internet, not sure if it was an "authorized" dealer or not. I registered my radio through the Pioneer site. It's been over five weeks and I'm still waiting for the software update. I spoke to Pioneer tech support, I was assured the software would be sent out shortly. I've seen some of the new AVIC-D1 Version 1.2 software for sell on eBay. Has anyone received the new version 1.2 from Pioneer yet? By the way, if you have the XM/NAV traffic receiver connected to your AVIC-D1, disconnect the data cable. This will disable the "XM updating" message. Quote Link to post Share on other sites
offroaderf150 Posted November 6, 2006 Report Share Posted November 6, 2006 yeah i registered mine in july and nothing. i registered my g/fs n2 last year and never got anything for updates. go pioneer, im glad theyre on top of things over there. Quote Link to post Share on other sites
-1- Posted November 6, 2006 Report Share Posted November 6, 2006 I received my updated V1.2 from Pioneer as promised. I recently updated to more up-to-date software off of eBay. Plenty online and it's decently priced. Do an eBay search. Quote Link to post Share on other sites
cntrylvr79 Posted January 29, 2007 Report Share Posted January 29, 2007 Rise Topic RISE come back from the dead. The oldest post I could find jimmy Quote Link to post Share on other sites
fatboy02 Posted March 8, 2007 Report Share Posted March 8, 2007 I was wonding if anyone has run into this problem? I disconnected the Data cable from the Nav-traffic module to get rid of the xm updating issue until my 1.2 disc arrived and since I had to pull the whole dash apart (didn't know where tweeter installed the module) I figured I would go ahead and do the E-brake by-pass so I would have full functionality of the head unit. Once I got everything back together my updating message was gone but but I also have had intermittent XM recption ever since. I have since reconnected the data cable, and upgraded to the 1.2 and still have very poor xm reception. Was this due to the by-pass. I have performed a reset on the xm module as well as the head unit and also upgraded to the d2 (last night). Still the same issue with the XM. I am very reluctant to pull the head unit back out and undo the e-brak mod as the rats nest of wiring they left behind wsa a royal nightmare. Has anyone else experienced or am I just stuck with pulling the thing out and tracing the wires or go back to pre mod? PS... I learned the hard expensive way not to let Tweeter install anything in my vehicle. Quote Link to post Share on other sites
kerrys914 Posted March 20, 2007 Report Share Posted March 20, 2007 Hey if you need a hand I am in Williamsburg, VA and will be doing my AVIC soon. I am about 2hrs south of you. Cheers Quote Link to post Share on other sites
asianman35 Posted May 13, 2007 Report Share Posted May 13, 2007 is the new software version 1.2 need for the D3 also? cuz i get the xm updating warning. Quote Link to post Share on other sites
cntrylvr79 Posted May 13, 2007 Report Share Posted May 13, 2007 No it's not. Odds are the nav traffic service wasn't activated. Quote Link to post Share on other sites
asianman35 Posted May 14, 2007 Report Share Posted May 14, 2007 yeah i dont have the navtraffic anymore, didnt find it useful, so is there no way to get rid of the XM updating warning? Quote Link to post Share on other sites
naplesbill Posted May 14, 2007 Report Share Posted May 14, 2007 If you unplug the data cable between the XM receiver and the radio this message will go away. Quote Link to post Share on other sites
GFD440 Posted May 17, 2007 Report Share Posted May 17, 2007 Where can I download the version 1.2 update from does anyone know? Quote Link to post Share on other sites
cntrylvr79 Posted May 17, 2007 Report Share Posted May 17, 2007 You get it for free from pioneer. Call them. Quote Link to post Share on other sites
Derf Posted November 25, 2007 Report Share Posted November 25, 2007 I get this nag on my D2 WITH XM nav traffic. I called Pioneer, they said it's the cable. It's not. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.