Jump to content
AVIC411.com

Australian Map Update (R17 Maps Page 23)


Recommended Posts

Usual Disclaimer:

These files are for hobbyist use only. Use them at your own risk I can not be responsible for your actions if something goes wrong. Make sure you take a backup of your system prior to any changes

 

Contained in this release:

Test mode setup for Australia

Australian Map Update Sensis R15.1 with 3d Buildings

SUNA TMC traffic Management

Key Beep removal mod

Updated DATA.ZIP

Updated SYS.TXT

Updated Fonts

 

This release has been tested on the Australian AVIC-F900BT

 

Download files from

http://www.4shared.com/file/95580165/5b ... part1.html

http://www.4shared.com/file/95583929/2a ... part2.html

http://www.4shared.com/file/95577170/2d ... part3.html

 

Links:

Sensis

http://www.sensis.com.au

SUNA

http://www.sunatraffic.com.au/home.html

 

Key Beep Mod

http://avic411.com/forum/viewtopic.php?t=17249

 

DATA.ZIP

Many thanks to GTIMatt for posting his data.zip and to lacehim for the Kph version. Included in the release is the second version of lacehim's changes. For info on this data.zip see http://www.avic411.com/forum/viewtopic.php?f=34&t=23003&p=155294&hilit=risk#p155294

 

SYS.TXT

Many tweaks added over time, too many to list here

 

Fonts

I have included the fonts need by the mods contained in this release.

 

Test Mode

Read the AVIC411 Faq's http://avic411.com/forum/viewtopic.php?f=32&t=19170'>http://avic411.com/forum/viewtopic.php?f=32&t=19170

 

Instructions

This update will just fit on a 1Gb SD card but it is advisable to use a SD card greater than 1Gb.

 

1. Start you AVIC normally and verify you have the V2 Firmware installed.

Check Pioneer website for info and download of the V2.0 Firmware and how to check you have it installed http://Https://www.pioneer.com.au/avicf900btDownload.aspx

 

2. Check your map version.

Go into Settings / Navi Settings / About / Maps

Your Maps will display Sensis R14 or similar

 

3. Extract this update to the root of an empty SD card. Do not modify the directory structure

 

4. Insert the SD card and Start the AVIC

 

5. Use Test mode to backup your unit. A Directory called "Backup" has been created on the SD card for your backup. Copy your "Flash Disk" to this directory

 

Read the AVIC411 Faq's If you are unsure on Test Mode

http://avic411.com/forum/viewtopic.php?f=32&t=19170

 

6. Rename or Delete the Following Directories on "My Flash Disk". I recommend you rename the directories but it's up to you.

 

Rename My Flash Disk\Update\APL2\iGo\CONTENT to My Flash Disk\Update\APL2\iGo\CONTENT.bak

Rename My Flash Disk\Update\APL2\iGo\LICENSE to My Flash Disk\Update\APL2\iGo\LICENSE.bak

 

7. If you don't want the key beep mod skip this step. Go into My Flash Disk\DATA\Sound and delete the files PSG1Hi.wav, PSG1Low.wav, PSG2Hi.wav and PSG2Low.wav. Don't worry renamed copies of these files are contained in this update. These are called 1PSG1Hi.wav, 1PSG1Low.wav, 1PSG2Hi.wav and 1PSG2Low.wav To reverse this mod later just rename the files back to normal.

 

8. Copy The directories below SD Card\Update to "My Flash Disk". When asked say yes to overwriting files. Copies of the overwritten Files are contained in this release. The Main Files overwritten are DATA.ZIP EZRIDER.EXE and SYS.TXT copies of the original files will be copied to you flash drive as DATA.BAK, EZRIDER.BAK and STS.BAK These are the files from The V2.0 Firmware update

 

9. Restart Your AVIC

 

10. Verify you have the new Maps

Go into Settings / Navi Settings / About / Maps

The Map will now be "Australia R15dot1 Sensis [081027]

 

I have held back some updates to the standard TMC Traffic, The Phoneme file and some other mods. Once these are fully tested I will release these Updates as well

Link to post
Share on other sites
  • Replies 480
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Just got a reply from Aussie Pioneer regarding the map update in August 2009.

 

"The 2009 update due to be released in August will be Sensis version 15.1"

 

All the above by 34by151 works great on my F900BT. Thanks for all your hard work 34by151.

Link to post
Share on other sites

Thanks Guys,

 

I have tested the phoneme update and that will be in my next release. I have also tested the Auto/Manual tune for the TMC and am completeing the screen changes. I'm hoping to release both this weekend.

 

Update will have

Phoneme File added to the 15.1Maps to give proper voice prompts on some roads

GTIMatt's latest Data.zip

New TMC options added to above for Auto / Manual Tune

New TMC icons for different event types

Options to exclude event type from route recalc

Options to include TMC text with icon on map

When Manual tune is selected up /down tune buttons apper on the TMC Contol center for Tuning.

On boot tuner will find the first valid TMC signal an lock on. You can then manually tune from that point.

I have not worked out how to start on the last saved TMC station as yet but will keep working on that.

 

Cheers

34by151

Link to post
Share on other sites

Aussie units are pre registered for SUNA however the maps don't support it. I dont' know if the V1.0 units are registered or not my unit was shipped with V2.0.

 

If you add my update SUNA will start working. You will see both traffic data in the control center and icons on the map.

 

For those of you that have PM'd and emailed me about the update I'm still working on the screen changes. I hope to get that out to everyone before the end of the long weekend

 

For details on SUNA and the stations see the SUNA website using the link I posted

 

Cheers

34by151

Link to post
Share on other sites

Updated Release

 

Usual Disclaimer:

These files are for hobbyist use only. Use them at your own risk I can not be responsible for your actions if something goes wrong. Make sure you take a backup of your system prior to any changes

 

Contained in this release:

* Phoneme File added to the 15.1Maps to give proper voice prompts on some roads

* GTIMatt's latest Data.zip (09 Apr)

* Swapped the position of the Delete Route and Voice Mute buttons

* New TMC options added to above for Auto / Manual Tune

* New manual tune buttons, press for 0.1mhz change, long press seek next station

 

Held back , still testing

* New TMC icons for different event types

* Options to exclude event type from route recalc

* Options to include TMC text with icon on map

* sys.txt Variable to set Tuner start mode

 

Download files from:

http://www.4shared.com/file/98059420/fd ... date1.html

 

Instructions:

1. Download files

2. Extract to the SD card overwriting files from the first release

3. Follow the instructions from the first release

 

Cheers

34by151

Link to post
Share on other sites

Thanks mate! Legend!! :P

 

I don't have an AVIC F series yet but I want to get one...... could someone order a 900BT or 90BT from the US for a lot cheaper and put these maps on?

 

If yes, how would one then register a US unit for SUNA?

 

Ta!

 

PS SUNA is now being broadcast over 101.1FM in Melbourne and 97.3FM in Brisbane and on 106.5FM in Sydney.

Link to post
Share on other sites

I have Updated the DATA.zip file

 

Added the TMC and signal status to the menu.

 

This will show

* Testing when you fin a new station

* No TMC signal id the station does not have TMC

* TMC Present if a TMC data is found

* TMC data type and key if TMC is found and locked on

 

Screen Pic Here

http://www.4shared.com/file/98207775/97213a46/tmc.html

 

download the new data.zip here

http://www.4shared.com/file/98207724/9d51fe95/DATA.html

 

Cheers

34by151

Link to post
Share on other sites

Thanks heaps for this, 34by151 !!!

 

Would you please be able to start a CHANGELOG or readme.txt so that user who would like

to use other data.zip mods in the future know what the differences are?

(say for example someone wanted to use a data.zip from another modder than GTIMatt...)

 

Thanks!

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...