SFNavi Posted April 14, 2009 Report Share Posted April 14, 2009 I have recently updated the firmware to 2.0 and the unit seem to work fine for a couple minus the long delay on the BT to disconnect but thats another problem. About 5 days later I get in my truck and the unit turns on and i go to select a A/V source and it reboots and continues to reboot every time you start to mess with it. Its almost like its freezing up and then justs reboots itself. I can not get into any menu screens or any thing to see whats going on. Has anyone had this problem or know what i can do to fix the problem. Thanks Quote Link to post Share on other sites
another gsxr 1k Posted April 15, 2009 Report Share Posted April 15, 2009 There's two potential fixes, boot your unit into test mode and search for 4 files named gpspara0.bin, gpspara1.bin, gpspara2.bin and gpspara3.bin delete them and reboot. See if that fixes it. IF not, you'll probably need to reload it. Quote Link to post Share on other sites
SFNavi Posted April 15, 2009 Author Report Share Posted April 15, 2009 Ok, now how do I boot the unit into test mood? Quote Link to post Share on other sites
wedebrook Posted April 15, 2009 Report Share Posted April 15, 2009 you have to get the testmode and mitacap files onto a SD card and insert the SD card into the slot with the unit off. when you start it up, it will have a screen that says "copying files..." let it do its thing, then close that window and open up "my flash drive" and look for those files that you are supposed to delete. i just learned all this stuff the hard way two days ago. Quote Link to post Share on other sites
another gsxr 1k Posted April 15, 2009 Report Share Posted April 15, 2009 Look at the second post in this thread viewtopic.php?p=127139#127139 Quote Link to post Share on other sites
SFNavi Posted April 16, 2009 Author Report Share Posted April 16, 2009 Thanks, I will be trying this tonight. I hope it works. Quote Link to post Share on other sites
SFNavi Posted April 16, 2009 Author Report Share Posted April 16, 2009 Just finished up... Everything seems to be working good. I'm headed out for a 2 hour ride, hopefully there won't be any problems. Thanks again for everything. Quote Link to post Share on other sites
another gsxr 1k Posted April 17, 2009 Report Share Posted April 17, 2009 SFNavi, please detail what fixed your issue and what steps you took. Quote Link to post Share on other sites
SFNavi Posted April 17, 2009 Author Report Share Posted April 17, 2009 Ok things seem to be working fine for now. Here is the list of what I did... 1) Go the link http://www.avic411.com/forum/viewtopic.php?p=127139#127139 go down to 2nd post and download the files for Test Mode. Put the 2 files "mitacap and testmode" on the root of your SD card. 2) Next insert your SD card with the test mode files on it and start your vehicle. Allow the unit to copy over the files and then the screen will turn green. Take your stylus and close it out in the upper right hand corner. You should now see the windows screen. 3) Open the Folder "My Flash Drive". There should be about 10-15 files in there. Look for the files named " gpspara0.bin, gpspara1.bin, gpspara2.bin and gpspara3.bin . These are the files you need to delete. I connected my USB drive and copied them over to there first just incase I had a problem. Thats up to you. They will be recreated once you turn your unit back on. These are the only 4 files that I deleted. 4) Once this done disconnect your USB drive and remove your SD card from the slot. Then take your stylus and push and hold "5 seconds" the reset button, this is the small little button near the eject button. 5) Give it a minute or 2 to boot up and then you need to go in and reset your EQ, presets, and GPS Home. This is the way that fixed my problem hopefully it will work for others. Quote Link to post Share on other sites
sajin Posted May 4, 2009 Report Share Posted May 4, 2009 I created an account just to say thank you and that the above steps worked. I went out and bought an sd card and reader.i did the testmode and deleted those files stated to do so and now it works like a champ. this reboot nonsense is BS but hey shit happens. thanks a lot Quote Link to post Share on other sites
tribuindu Posted October 5, 2009 Report Share Posted October 5, 2009 Hello everyone in this site I tried to erase the 4 files posted above but my avic wont start in test mode i did everything exacly as it says but wont detect any files thanks in advance Quote Link to post Share on other sites
tribuindu Posted October 5, 2009 Report Share Posted October 5, 2009 by SFNavi on Fri Apr 17, 2009 4:16 pm Ok things seem to be working fine for now. Here is the list of what I did... 1) Go the link viewtopic.php?p=127139#127139 go down to 2nd post and download the files for Test Mode. Put the 2 files "mitacap and testmode" on the root of your SD card. 2) Next insert your SD card with the test mode files on it and start your vehicle. Allow the unit to copy over the files and then the screen will turn green. Take your stylus and close it out in the upper right hand corner. You should now see the windows screen. 3) Open the Folder "My Flash Drive". There should be about 10-15 files in there. Look for the files named " gpspara0.bin, gpspara1.bin, gpspara2.bin and gpspara3.bin . These are the files you need to delete. I connected my USB drive and copied them over to there first just incase I had a problem. Thats up to you. They will be recreated once you turn your unit back on. These are the only 4 files that I deleted. 4) Once this done disconnect your USB drive and remove your SD card from the slot. Then take your stylus and push and hold "5 seconds" the reset button, this is the small little button near the eject button. 5) Give it a minute or 2 to boot up and then you need to go in and reset your EQ, presets, and GPS Home. This is the way that fixed my problem hopefully it will work for others.SFNavi Posts: 8 Joined: Mon Apr 13, 2009 6:28 pm Private message Top my avic isnot detecting my sd with files in it I did it exactly as it says in that post, but no luck any ideas thanks Quote Link to post Share on other sites
HTSPRES Posted October 5, 2009 Report Share Posted October 5, 2009 I can't get my F-900 to even go to test mode. Any suggestions? Quote Link to post Share on other sites
laci102 Posted October 6, 2009 Report Share Posted October 6, 2009 Help me! I am in Hungary, I have a Pioneer AVIC F900 BT. type of navigation device. Come 2:05 version. The maps I would like to replace it, but I do not know, because I always rebootol. The maps are the same (8.0) device. What can be done to change the maps to know? Quote Link to post Share on other sites
tribuindu Posted November 8, 2009 Report Share Posted November 8, 2009 Hello check this out http://www.gpsunderground.com/forums/sh ... stcount=14 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.