Jump to content
AVIC411.com

04 Nissan Titan / AVIC Z1 Install


Recommended Posts

Been poking around here for a few weeks and finally pulled the plug on buying a Z1 so I thought I would share a pic of the install. Nothing special but pretty clean looking. I also installed a PACSWIPS along with the unit so if anyone with a similar vehicle has any questions I am sure I can help.

Anyways, here's a couple of pics.

This is just a general pic of how it fit
[img]http://www.pennsylvaniaanglers.com/avicpics/fitnav.jpg[/img]

Library Screen, love my country :)
[img]http://www.pennsylvaniaanglers.com/avicpics/lib.jpg[/img]

troutspinner
Link to post
Share on other sites
Sweet. I'm going to take my original bezel fiberglass the opening and then recut it. I'm going to do my own carbon fiber dash cover.

BTW I have to try the PAC Audio programing again. I have to start by regrounding the system. Then check for connections. I made new connections for the resistors so I'll re do that just in case I did some thing wrong with them.

Again Nice install.

Do you belong to the Clubtitan.com forum?
Link to post
Share on other sites
djoker,

If you do not have the nav system in your Armada just buy the XE bezel faceplate rather than cutting and fiberglass. The work is already done for you and if you ever want to return the unit back to stock you'll have the parts still around.

I got it at courtesy nissan, a link to the Titan Bezel is here

[url=http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=68260-A60CC]http://www.courtesyparts.com/Merchant2/ ... 8260-A60CC[/url]

and a link to the Armada Bezel is here [url=http://www.courtesyparts.com/Merchant2/merchant.mvc?Screen=PROD&Product_Code=68260-TA60CC]http://www.courtesyparts.com/Merchant2/ ... 260-TA60CC[/url]

The difference between the two would be if you have to the two knobs on the right side.

Scosche (sp?) also sells the bezel for cheaper but it relocates the hazard switch. Personally, I prefer OEM but that's me.

I am not a member there but I will check it out. I am a member of titantalk though.

troutspinner
Link to post
Share on other sites
Thanks I'll look into that. Well I did the change around and I nominate myself for the DAISY award (Dumb A$$ InStaller of the Year) I went back and looked at the harness I connected and realized that there were only 12 pins. So I looked thru and saw a harness tucked away at the bottom and sure enough there it was. Attached reconnected and programed. I swear the program part was so Dang easy. I have a small tiny delay on the Vol. But that's good for me. I programed Vol +/- Mute Source and preset +/-. Thanks for the help.

K
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...