profound Posted June 15, 2009 Report Share Posted June 15, 2009 Can anyone pllllease help with eq setting for my avic-f700bt, the instal shop guys were morons and blew two of my speakers with there settings. i have two 12" alpine type s subs 1 alpine mrp-m450 vpower AMP and some6.5 inch 210 w max 2 way coaxial speakers im not sure what to put the hpf too or the adjustments on my amp to? and the eq settings are a nightmare. Hope u can help. Thanks guys Quote Link to post Share on other sites
1loudls Posted June 16, 2009 Report Share Posted June 16, 2009 there is no exact way to adjust the EQ, you either add or subtract bass, mids, and treble until it sounds good to you. did the installers blow the speakers while they where working on it or did the speakers blow after you left the shop? i would start with the HPF and LPF set to around 80Hz, that way the subs can play below that and the mids and highs will play above that, then start with the preset EQ settings and see which one you think sounds the best then tweek that one what about the EQ settings are a nightmare? Quote Link to post Share on other sites
hottwhyrd Posted June 17, 2009 Report Share Posted June 17, 2009 my typical pioneer settings volume should never go over 3/4 ever ever never bass=0 or less freq 100 mid= 2 or 3 freq 1 treble= 3 and up freq 10k hpf on at 125 yes it high but it will save your mids from your retardedness lol sub xover at 125 unless you have 15s if your deck has a sound mode i like "living room" but it adds a huge boost to the sound. meaning you cant turn the volume up past 15 hope it helps. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.