DefiniteChoice Posted June 27, 2009 Report Share Posted June 27, 2009 I have an MB Quartz set in the front doors (6x9 and tweeter with crossover) and 6.5's in the rear door. My head unit is a Pioneer AVIC-D3. I also have a single 10 inch sub and amp ran off the subwoofer-out leads. I had a 5 channel amp running the separates that I have since taken out and sold. I had ran RCA cables off the back of the head unit to the amp, then custom wiring to the speakers. Since removing the amp/wiring/RCA cables, I have purchased the Crutchfield wiring harnesses so I can plug into the factory harnesses. The rear speakers work fine, but now the front speakers aren't working (speaker OR tweeter). I double checked all my wiring, checked that all harnesses are connected on the back of the head unit, and checked the fader settings on the head unit. I also checked my Tacoma's fuses, and all are good to go. I am stumped and frustrated. Thoughts? Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.