enkrypt3d Posted July 31, 2009 Report Share Posted July 31, 2009 http://ds1.downloadtech.net/cn1010/firm ... Update.zip ^ Mirror for the 3.01 update http://www.pioneerelectronics.com/ephox ... Update.pdf And the instructions to update from 3.0 to 3.01 enjoy Quote Link to post Share on other sites
Minyhulk Posted July 31, 2009 Report Share Posted July 31, 2009 hey i need some help mess up at the end can someone help me my unit is not bricked yet If you can help me please call me cell 201 982 5782 Quote Link to post Share on other sites
enkrypt3d Posted July 31, 2009 Report Share Posted July 31, 2009 hey i need some help mess up at the end can someone help me my unit is not bricked yet If you can help me please call me cell 201 982 5782 um first of all I can barely understand what you just said... secondly, what exactly is your problem? Where did you get stuck? viewtopic.php?f=34&t=25817 This guide is much easier to understand... read it... or print it out and try it again.. Quote Link to post Share on other sites
Minyhulk Posted July 31, 2009 Report Share Posted July 31, 2009 at the end the "my flash disk" i accidently tried putting the x910 bt zip into that i deleted some stuff and now the unit just keeps reseting blue screen then black Quote Link to post Share on other sites
enkrypt3d Posted July 31, 2009 Report Share Posted July 31, 2009 at the end the "my flash disk" i accidently tried putting the x910 bt zip into that i deleted some stuff and now the unit just keeps reseting blue screen then black then start over at step one... and copy the correct files to the proper place... you need to UNZIP the .zip file with WINRAR (www.rarlab.com) and then follow the instructions in the link above. Quote Link to post Share on other sites
Minyhulk Posted August 1, 2009 Report Share Posted August 1, 2009 alright one question for the end for the x910 file where i am putting that exactly. Thank for your help so far Quote Link to post Share on other sites
enkrypt3d Posted August 1, 2009 Report Share Posted August 1, 2009 alright one question for the end for the x910 file where i am putting that exactly. Thank for your help so far Copy the files inside that zip file into the "\my flash disk".... it should look like this: http://www.imagebam.com/image/7d979142574344 But first delete everything that is in your "\My Flash Disk" .....then copy the files over... be sure to copy the files INSIDE "My Flash Disk" from the SD card and not the folder "My Flash Disk"... Quote Link to post Share on other sites
Minyhulk Posted August 1, 2009 Report Share Posted August 1, 2009 but there is only that one x910 file ??? Quote Link to post Share on other sites
enkrypt3d Posted August 1, 2009 Report Share Posted August 1, 2009 Did u unzip it??? Quote Link to post Share on other sites
crilleym Posted August 1, 2009 Report Share Posted August 1, 2009 but there is only that one x910 file ??? I think you better do a little more reading before you really hose your unit. The instructions are very simple. There are too many posts about on how to do this. I know it can be frustrating, but follow the instructions carefully and you will be fine...print them out.. Here is a good guide viewtopic.php?f=34&t=25817&start=0 Quote Link to post Share on other sites
enkrypt3d Posted August 1, 2009 Report Share Posted August 1, 2009 but there is only that one x910 file ??? I think you better do a little more reading before you really hose your unit. The instructions are very simple. There are too many posts about on how to do this. I know it can be frustrating, but follow the instructions carefully and you will be fine...print them out.. Here is a good guide viewtopic.php?f=34&t=25817&start=0 +1... or buy the official one... Quote Link to post Share on other sites
hanibal Posted August 1, 2009 Report Share Posted August 1, 2009 its not hard at all i put all the files on one sd card and works no problem? Quote Link to post Share on other sites
enkrypt3d Posted August 1, 2009 Report Share Posted August 1, 2009 its not hard at all i put all the files on one sd card and works no problem? yes but you have to follow a few different steps if its all on one card.... as in be sure u are copying the correct files etc Quote Link to post Share on other sites
Minyhulk Posted August 1, 2009 Report Share Posted August 1, 2009 thanks enkrypt3d. i figured it out thanks for all the help. Quote Link to post Share on other sites
spinedoc Posted August 2, 2009 Report Share Posted August 2, 2009 Just finished this upgrade, THANK YOU!!!! This was the easiest upgrade I ever did. Tomorrow I will tackle getting to 3.01. I'm just thankful for Heads up mode in 2d, this was my only complaint about my f900. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.