BulletHead Posted August 11, 2009 Report Share Posted August 11, 2009 i can use this guide to go from my stock v2.0 f90bt to v3.0 right? i dont have to buy the update from pioneer? Quote Link to post Share on other sites
BorisM Posted August 11, 2009 Report Share Posted August 11, 2009 i can use this guide to go from my stock v2.0 f90bt to v3.0 right? i dont have to buy the update from pioneer? You can steal it, then this guide will work OK. Quote Link to post Share on other sites
BulletHead Posted August 11, 2009 Report Share Posted August 11, 2009 i can use this guide to go from my stock v2.0 f90bt to v3.0 right? i dont have to buy the update from pioneer? You can steal it, then this guide will work OK. im asking if those files in the first post for SD1, SD2 and SD3 are downloaded, is that all that i would need for the update? Quote Link to post Share on other sites
enkrypt3d Posted August 11, 2009 Report Share Posted August 11, 2009 i can use this guide to go from my stock v2.0 f90bt to v3.0 right? i dont have to buy the update from pioneer? You can steal it, then this guide will work OK. im asking if those files in the first post for SD1, SD2 and SD3 are downloaded, is that all that i would need for the update? yes... u can put them all on one 2GB SD card... just be sure you are coping the right files to the right place... Quote Link to post Share on other sites
BulletHead Posted August 12, 2009 Report Share Posted August 12, 2009 what does this mean? SD 2: TestMode 2.3 - 1.65MB ( Must be in a testmode folder) "must be in a testmode folder" also, does it have to be untarred first? Quote Link to post Share on other sites
eXtReMeP4in Posted August 12, 2009 Report Share Posted August 12, 2009 Hi guys. I tried searching but got no hits; however is it possible that I update the Wince through my sd card and upload the new files through a 2 gig usb drive? Quote Link to post Share on other sites
enkrypt3d Posted August 13, 2009 Report Share Posted August 13, 2009 what does this mean? SD 2: TestMode 2.3 - 1.65MB ( Must be in a testmode folder) "must be in a testmode folder" also, does it have to be untarred first? this means exactly what it says... copy the "testmode" folder to the SD card... otherwise testmode wont work! durh... and yes it has to be unzipped... i swear some of you guys cant even manage to unzip a file... I dont think you should be modifying your AVIC... i mean its not that hard is it? Quote Link to post Share on other sites
BulletHead Posted August 13, 2009 Report Share Posted August 13, 2009 looks like we have a problem... i hope i didnt brick it. i only have a 2GB sd card and i was going back and forth between the pc and the car to update and when i go back inside to load it with the 1.59GB sd3 data load, for some reason, it runs out of space at around 995MB. its a 2GB card and i formatted it! i tried a few times and it still thinks it only has about 1GB space on it. can i start all over again once i have a new SD card or is the system bricked? i get a blank screen after the pioneer logo screen. any help will be greatly appreciated... Quote Link to post Share on other sites
enkrypt3d Posted August 13, 2009 Report Share Posted August 13, 2009 looks like we have a problem... i hope i didnt brick it. i only have a 2GB sd card and i was going back and forth between the pc and the car to update and when i go back inside to load it with the 1.59GB sd3 data load, for some reason, it runs out of space at around 995MB. its a 2GB card and i formatted it! i tried a few times and it still thinks it only has about 1GB space on it. can i start all over again once i have a new SD card or is the system bricked? i get a blank screen after the pioneer logo screen. any help will be greatly appreciated... um you should be able to fit all required files onto ONE 2GB SD card... be sure you disable hidden files... maybe there is a hidden file in there thats taking up the space? This is what I did: I had the WINCE files on the root of the SD card And the TestMode folder containing the small files required for testmode to work. then I made a folder called "My flash Disk" so I know which files to copy and then I dropped the torrent files into this folder... be sure you're only copying these files into the avic's "my flash disk"..... make sense? all the files total are just under 2GB so everything fits just fine... not sure how you have managed to fill it up... Quote Link to post Share on other sites
Segler1963 Posted August 13, 2009 Report Share Posted August 13, 2009 i have avic f900bt europe version (poland) firware version is 3.010100and map TA 2009 09427 HACKED ezrider2007 Hang on! This means you have a hacked EZrider for 3.0 ? Can you pls make that available? Thanks Quote Link to post Share on other sites
BulletHead Posted August 13, 2009 Report Share Posted August 13, 2009 looks like we have a problem... i hope i didnt brick it. i only have a 2GB sd card and i was going back and forth between the pc and the car to update and when i go back inside to load it with the 1.59GB sd3 data load, for some reason, it runs out of space at around 995MB. its a 2GB card and i formatted it! i tried a few times and it still thinks it only has about 1GB space on it. can i start all over again once i have a new SD card or is the system bricked? i get a blank screen after the pioneer logo screen. any help will be greatly appreciated... um you should be able to fit all required files onto ONE 2GB SD card... be sure you disable hidden files... maybe there is a hidden file in there thats taking up the space? This is what I did: I had the WINCE files on the root of the SD card And the TestMode folder containing the small files required for testmode to work. then I made a folder called "My flash Disk" so I know which files to copy and then I dropped the torrent files into this folder... be sure you're only copying these files into the avic's "my flash disk"..... make sense? all the files total are just under 2GB so everything fits just fine... not sure how you have managed to fill it up... i may have bad sectors on that card. ill get a new card and try again. do i have to start at step 1 though? Quote Link to post Share on other sites
Tomola Posted August 13, 2009 Report Share Posted August 13, 2009 i have the firmware ver.3.03 on my f900. how do i backup that? Quote Link to post Share on other sites
BulletHead Posted August 13, 2009 Report Share Posted August 13, 2009 can i do this install using a USB flash drive? or does it have to be SD card? Quote Link to post Share on other sites
LipschitzWrath Posted August 13, 2009 Report Share Posted August 13, 2009 Step 4.4: Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. This part makes me laugh! It reminds me of doing Sub-Zero's fatality on Mortal Kombat II. LOLOLOL! "FINISH HIM!" Quote Link to post Share on other sites
enkrypt3d Posted August 13, 2009 Report Share Posted August 13, 2009 Step 4.4: Press the volume knob in this sequence and you will see * signs for each push: Up, Up, Down, Menu, Left, Right. This part makes me laugh! It reminds me of doing Sub-Zero's fatality on Mortal Kombat II. LOLOLOL! "FINISH HIM!" well if you are old like me, it reminds me of the Contra cheat code on Nintendo! .... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.