Weaseal Posted August 8, 2009 Report Share Posted August 8, 2009 Hi all, Any clues where I can download the 3.01 firmware update? I'm running a F700BT on firmware 3.0. Dug around Pioneer's website a little and came up empty handed. Searched the forums too, before you flame me Quote Link to post Share on other sites
jenger2000 Posted August 8, 2009 Report Share Posted August 8, 2009 http://www.pioneerelectronics.com/PUSA/ ... 10BT?tab=F This link is also posted in the complete 3.0 install guide thread. Quote Link to post Share on other sites
ahfunaki Posted August 9, 2009 Report Share Posted August 9, 2009 So can I do this update on my F700 with the 3.0 update already installed? Quote Link to post Share on other sites
jenger2000 Posted August 9, 2009 Report Share Posted August 9, 2009 Yes Quote Link to post Share on other sites
ahfunaki Posted August 9, 2009 Report Share Posted August 9, 2009 I actually just figured that out and did it, worked perfect. Thanks! Quote Link to post Share on other sites
Speedy@1098 Posted August 11, 2009 Report Share Posted August 11, 2009 Hello, is it possible to update european 3.0 too? I've tried to update it with the F910BT file from the european site, but when i put the SD card in my F700BT with European 3.0, the unit will boot normally and the update didn't starts. What i have to do? Daniel Quote Link to post Share on other sites
jml2008 Posted August 13, 2009 Report Share Posted August 13, 2009 is the 3.01 firmware update file the same for the avic700 and the avic900 Quote Link to post Share on other sites
Nuje Posted August 13, 2009 Report Share Posted August 13, 2009 Ok. I'm wondering what I did wrong then. I downloaded the 3.01 update from pioneerelect...com and followed the install instructions, but ended up in the "System is starting up .... please wait" hell. Sound and buttons worked, but couldn't get map or get rid of that system message. Any ideas out there what went wrong? Quote Link to post Share on other sites
swankydank2001 Posted August 13, 2009 Report Share Posted August 13, 2009 I dont know if im doing something wrong here. i downloaded the update. put it on a SD card and put it in my 90bt. I started showing that it was copying. Then when i got half way the screen turned red and said "\APL2\iGo\content\dem\UnitedStates.dem could not be copied" Am i doing something wrong. Please help Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.