Jump to content
AVIC411.com

Abb's NAV Mod V2.75 for 'Chrome Theme' - Upd. July 7 '10


Recommended Posts

  • Replies 718
  • Created
  • Last Reply

Top Posters In This Topic

I live in Winnipeg where we have speed/redlight cameras. Just got a $228.25 for driving 64kph in what I thought was a 60Kph zone. Having said that, with the V2.75 I cannot get an audible alert when approaching a speed cam, though the icon showing the camera does show up. I reverted to daftia's mod and that one does alert, either voice or buzz. Any idea why one works and the other doesn't? :?:

 

Dig into the Nav Settings->Warning and enable everything.

 

Sorry for your ticket dude.

 

Did that, no go. I tried every combination I could. Put the daftia back in for now, even tho I like the mod v2.75 a lot.

Link to post
Share on other sites

Did that, no go. I tried every combination I could. Put the daftia back in for now, even tho I like the mod v2.75 a lot.

 

I love a lot V2.75 too, especially for its correct Smartzoom operation.

 

Last try:

 

1) Delete \My Flash Disk\User\UserData\iGo and all folders and files under it (iGo configuration files).

2) Delete the following line in your SYS.TXT file:

 

warn_distances="130:1400,125:1400,120:1400,120:1400,115:1400,113:1400,100:1400,97:1400,95:1400,90:1400,89:1400,85:1400,80:1400,75:1400,72:1400,70:1400,65:1400,64:1400,60:1400,56:1400,55:1400,50:1400,48:1400,45:1400,40:1400,35:1400,32:1400,30:1400,25:1400,24:1400,20:1400,15:1400,0:1400"

Link to post
Share on other sites

 

Did that, no go. I tried every combination I could. Put the daftia back in for now, even tho I like the mod v2.75 a lot.

You can give my V3.0 a shot as that is based on Diaftias mod. If they worked in Diaftias mod, then they will work in my V3.0 as I have not touched anything regarding the speedcams, mostly because we dont have them here in this part of the country and I have no way of testing it. That was actually the first that I heard that the audible warning was not working in the 2.75, so I would really like to know if they work in my V3.0. ALSO, MAKE SURE THAT WHEN CHANGING MODS, THAT YOU ALWAYS DELETE THE IGO FOLDER 'My Flash Disk\User\UserData' AS THERE ARE A LOT OF PARTS OF THE MOD THAT WILL NOT WORK IF YOU DO NOT DO THIS!!

Link to post
Share on other sites

Did that, no go. I tried every combination I could. Put the daftia back in for now, even tho I like the mod v2.75 a lot.

 

I love a lot V2.75 too, especially for its correct Smartzoom operation.

 

Last try:

 

1) Delete \My Flash Disk\User\UserData\iGo and all folders and files under it (iGo configuration files).

2) Delete the following line in your SYS.TXT file:

 

warn_distances="130:1400,125:1400,120:1400,120:1400,115:1400,113:1400,100:1400,97:1400,95:1400,90:1400,89:1400,85:1400,80:1400,75:1400,72:1400,70:1400,65:1400,64:1400,60:1400,56:1400,55:1400,50:1400,48:1400,45:1400,40:1400,35:1400,32:1400,30:1400,25:1400,24:1400,20:1400,15:1400,0:1400"

 

Commenting out that line in instruction 2 did the trick, except I can't get that annoying beep to stop. Prefer the voice warning. I'll keep digging, thanks for the help. :)

Link to post
Share on other sites

 

Did that, no go. I tried every combination I could. Put the daftia back in for now, even tho I like the mod v2.75 a lot.

You can give my V3.0 a shot as that is based on Diaftias mod. If they worked in Diaftias mod, then they will work in my V3.0 as I have not touched anything regarding the speedcams, mostly because we dont have them here in this part of the country and I have no way of testing it. That was actually the first that I heard that the audible warning was not working in the 2.75, so I would really like to know if they work in my V3.0. ALSO, MAKE SURE THAT WHEN CHANGING MODS, THAT YOU ALWAYS DELETE THE IGO FOLDER 'My Flash Disk\User\UserData' AS THERE ARE A LOT OF PARTS OF THE MOD THAT WILL NOT WORK IF YOU DO NOT DO THIS!!

 

Actually this was 3.0, got confused, sorry. I commented out the warning distance line is sys.txt and now the audible warning works, can't shut the beep off tho. I'll keep digging, thanks.

Link to post
Share on other sites

Commenting out that line in instruction 2 did the trick, except I can't get that annoying beep to stop. Prefer the voice warning. I'll keep digging, thanks for the help. :)

 

Good for you!

 

There is a setting for beeping that you can turn it off.

Link to post
Share on other sites
  • 2 weeks later...

Seeking help from a pro ... Abb or anyone else ...

 

For a given icon, could you please tell me what is the "z=" directive is immediately after "x=" and "y="? What it means?

 

How about "z=" at the end of a declaration of a layer? Sometime it is z=5000!

 

And what is "modal"?

 

I suppose "w=" is for the width and "h=" is for the height, right?

 

Thanks.

Link to post
Share on other sites
Seeking help from a pro ... Abb or anyone else ...

 

For a given icon, could you please tell me what is the "z=" directive is immediately after "x=" and "y="? What it means?

 

How about "z=" at the end of a declaration of a layer? Sometime it is z=5000!

 

And what is "modal"?

 

I suppose "w=" is for the width and "h=" is for the height, right?

 

Thanks.

X=horizontal pixel starting point (in the Avic, it would be 0-800)

Y=vertical pixel starting point (in the Avic, it would be 0-480)

W=width (of text)

Z=layer , eg. Z=5 would be below Z=10

Link to post
Share on other sites

Chuck, you probably moved something else. The majority of bmp's that you would move are found in the '800_480' UI folder. Tell me or show me a pic of what you want to move and I will direct you to the proper location.

Link to post
Share on other sites
Chuck, you probably moved something else. The majority of bmp's that you would move are found in the '800_480' UI folder. Tell me or show me a pic of what you want to move and I will direct you to the proper location.

 

Sorry Abb, please RE-READ my post. I want to move the position or coordinate (x,y) of an image (or icon) in the map screen, dynamically, so I have to use variables within the script files (i.e. *.UI).

 

Thanks.

Link to post
Share on other sites
Chuck, you probably moved something else. The majority of bmp's that you would move are found in the '800_480' UI folder. Tell me or show me a pic of what you want to move and I will direct you to the proper location.

 

Sorry Abb, please RE-READ my post. I want to move the position or coordinate (x,y) of an image (or icon) in the map screen, dynamically, so I have to use variables within the script files (i.e. *.UI).

 

Thanks.

I did reread the post. Three times before I posted and your post is not clear and that is why I asked for a picture of the image you want to move. If I see an image, I can help you
Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...



×
×
  • Create New...