DennisOS2 Posted December 15, 2006 Report Share Posted December 15, 2006 My Z1 has a manufacture date of July 2006. It was installed (reported earlier on this board) with a parking brake 'switch' but really didn't work and without the VSS connected. I do get the parking brake error message every time I start the system. Most importantly, the light flashing bypass is working beautifully. I'm having the VSS connected on Tuesday. Hopefully I'll be able to get into 3D from simple hybrid mode. Thanks to all that have helped on this board. Dennis -==- Philly Quote Link to post Share on other sites
tillithz Posted December 16, 2006 Report Share Posted December 16, 2006 um this has been covered a few times to say the least, but uhh reset the unit when you ground the parking break and that error msg shouldnt come back. Quote Link to post Share on other sites
DennisOS2 Posted December 16, 2006 Author Report Share Posted December 16, 2006 um this has been covered a few times to say the least, but uhh reset the unit when you ground the parking break and that error msg shouldnt come back. The reason for the post was to say that yet another July '06 unit works with light flash bypass ........ and to thank the board. I already know about the resetting .... from the board. Have to have the parking brake grounded first. Thanks. Quote Link to post Share on other sites
whtcrxghst Posted December 16, 2006 Report Share Posted December 16, 2006 You probably should have considered putting it in the Z1 section, not the N1/N2/N3 section Quote Link to post Share on other sites
DennisOS2 Posted December 16, 2006 Author Report Share Posted December 16, 2006 You probably should have considered putting it in the Z1 section, not the N1/N2/N3 section Talk about not paying attention ....... sorry about that. My apologies. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.